We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

LINKSYS PAP2-NA UNLOCKED. How to access control panel?

Options
1…5681011…13

Comments

  • BexTech
    BexTech Posts: 4,772 Forumite
    Will do, no problem! :)
    It's PAC not PAC Code, it's MAC not MAC Code, it's PIN not PIN Number, it's ATM not ATM Machine, it's LCD not LCD Display, it's DVD not DVD disc... It's no one not noone, It's a lot not alot, It's got not gotten... Panini is the plural of panino - there is no S!!
    (OK my English isn't great, the sciences, maths & IT are my strong points!)
  • ezhiks
    ezhiks Posts: 58 Forumite
    I also just got a PAP2 to use as an alternative to the setup I have already with a VOIP integrated router.

    So could I also ask BexTech for the settings please? I'd like to see what all the options are.

    Thank you
  • BexTech
    BexTech Posts: 4,772 Forumite
    That's been done, you should find you have a PM.
    It's PAC not PAC Code, it's MAC not MAC Code, it's PIN not PIN Number, it's ATM not ATM Machine, it's LCD not LCD Display, it's DVD not DVD disc... It's no one not noone, It's a lot not alot, It's got not gotten... Panini is the plural of panino - there is no S!!
    (OK my English isn't great, the sciences, maths & IT are my strong points!)
  • robert_harper_2000
    robert_harper_2000 Posts: 1,501 Forumite
    Could you PM those too, thanks Bextech I have the VOIP box you suggested and I'm getting some help from BritBrat perhaps I need one of those things?
    Help me to help you :santa2:
  • BexTech
    BexTech Posts: 4,772 Forumite
    robert_harper_2000 wrote: »
    Could you PM those too, thanks Bextech I have the VOIP box you suggested and I'm getting some help from BritBrat perhaps I need one of those things?


    That's been done, you should find you have a PM.
    It's PAC not PAC Code, it's MAC not MAC Code, it's PIN not PIN Number, it's ATM not ATM Machine, it's LCD not LCD Display, it's DVD not DVD disc... It's no one not noone, It's a lot not alot, It's got not gotten... Panini is the plural of panino - there is no S!!
    (OK my English isn't great, the sciences, maths & IT are my strong points!)
  • robert_harper_2000
    robert_harper_2000 Posts: 1,501 Forumite
    Cheers, just gotta get it working now .. lol
    Help me to help you :santa2:
  • ezhiks
    ezhiks Posts: 58 Forumite
    BexTech wrote: »
    Will do, no problem! :)

    Thank you, received and much appreciated. I think I will find this info useful.
  • ezhiks
    ezhiks Posts: 58 Forumite
    BexTech wrote: »
    Also: http://PAP2_IP_Address/upgrade?http://www.bextech.co.uk/voip/pap222.bin

    Will update the device, this is for the PAP2 ATAs and not the PAP2T ATAs.

    Make sure this is done on a generic unlocked device, and not one previously locked to Vonage.

    I've now got a PAP2, it's unlocked, but how do I know if it's a generic unlocked or previously locked to Vonage version, anyway to tell?

    I presume that if it was previously locked to Vonage then updating the firmware will lock it again, is this the case?

    And, do you know if the latest firmware 5.1.5LS (21.08.07) is a recommended update, it seems like quite a big jump from the 3.1.3LS that mine has come with, any comments?

    So many questions, so much to find out! Any help very much appreciated.
  • BritBrat
    BritBrat Posts: 3,764 Forumite
    Make sure the setting provision enabled is dissabled.

    Provision Enable - NO

    ARE YOU SURE THAT IS THE CORRECT FIRMWARE?

    I could not see it on the site for a PAP2.

    See how I did it but not to 5.1.5LS:
    http://forums.moneysavingexpert.com/showpost.html?p=5192058&postcount=34
  • ezhiks
    ezhiks Posts: 58 Forumite
    I think I found a link to the PAP2T firmware by mistake, I'll hold off for now anyway, I think my 3.1.3 seems to be later than 3.1.22 which is the latest on the Linksys website.

    Anyway I can say it is working just fine, voice quality does appear to better than the Draytek 2900VG, once I made a couple of tweaks such as reducing RTP packet size to 10ms and setting Jitter to 'low'. Nice to have a lot of adjustments to play with.

    I've also now set Provision Enable to 'OFF' - can I ask what this does?

    Thanks for all the contributions here.
This discussion has been closed.
★ ★ ★ Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 350.8K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.5K Spending & Discounts
  • 243.8K Work, Benefits & Business
  • 598.7K Mortgages, Homes & Bills
  • 176.8K Life & Family
  • 257.1K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.
Update Your Picture