We'd like to remind Forumites to please avoid political debate on the Forum... Read More »
We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
windows 7 installed now no network access PLEASE help
Options
Comments
-
debitcardmayhem wrote: »ok go to control panel/network and sharing/adapter settings
right click on the wired local area network adapter and select properties
then highlight internet protocol (TCP /IP v4) select properties
select use follong ip address
type in 192 168 001 020
then subnet mask 255 255 255 000
default gateway 192 168 001 254
dns 192 168 001 254
select ok
it should work0 -
ok go back to network and sharing and right click an select diagnose see what happens ,4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed dec 24 @ 5.74 tracker again+ Octopus Intelligent Flux leccy0
-
debitcardmayhem wrote: »ok go back to network and sharing and right click an select diagnose see what happens ,0
-
Just kicked other half off of our wired PC so I can look at it from there so I know what I am telling you one way or the other,
Go to Control Panel/Network and Sharing ..... yet again it should show you a diagram on the second line there should be something like Network and underneath Public Network in blue click that then select home network and we should be in business.
Trying to diagnose with a bad memory is not my forteThe park bench jogged my memory a bit
4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed dec 24 @ 5.74 tracker again+ Octopus Intelligent Flux leccy0 -
debitcardmayhem wrote: »Just kicked other half off of our wired PC so I can look at it from there so I know what I am telling you one way or the other,
Go to Control Panel/Network and Sharing ..... yet again it should show you a diagram on the second line there should be something like Network and underneath Public Network in blue click that then select home network and we should be in business.
Trying to diagnose with a bad memory is not my forteThe park bench jogged my memory a bit
connect to the internet lol
view network status and tasks
choose homegroup and sharing options
am i on the right page0 -
oh gosh must have been on here too long - clicked on start - control panel and it came up with adjust your computer settings in the network and internet section it has 3 options
connect to the internet lol
view network status and tasks
choose homegroup and sharing options
am i on the right page4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed dec 24 @ 5.74 tracker again+ Octopus Intelligent Flux leccy0 -
debitcardmayhem wrote: »Sorry to but in , but I think the OP is calling the base unit a hard drive , if I am wrong I apologise
edit Sorry folks / macman we crossed in the postyes your right silly me
Well at least it's no longer a modem.
Did you say in your original post that this has originally worked on the desktop PC under Win 7? If so has anything changed since? Antivirus/firewall software etc."A nation of plenty so concerned with gain" - Isley Brothers - Harvest for the World0 -
debitcardmayhem wrote: »Yes , If you have only one Windows 7 PC in the house then you don't need to set up a homegroup , and can share printers if you wish i.e. with sons lappy if you wish , also public documents.
thankyou0 -
Grade_A_Reject wrote: »Well at least it's no longer a modem.
Did you say in your original post that this has originally worked on the desktop PC under Win 7? If so has anything changed since? Antivirus/firewall software etc.
And errrm a visit to a computer shop to test4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed dec 24 @ 5.74 tracker again+ Octopus Intelligent Flux leccy0 -
what do i click on now to change my settings to home can you step by step guide me please
thankyou
as earlier
Go to Control Panel/Network and Sharing ..... yet again, it should show you a diagram on the second line there should be something like Network and underneath Public Network in blue click that then select home network and we should be in business.4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed dec 24 @ 5.74 tracker again+ Octopus Intelligent Flux leccy0
This discussion has been closed.
Confirm your email address to Create Threads and Reply

Categories
- All Categories
- 350.9K Banking & Borrowing
- 253.1K Reduce Debt & Boost Income
- 453.5K Spending & Discounts
- 243.9K Work, Benefits & Business
- 598.8K Mortgages, Homes & Bills
- 176.9K Life & Family
- 257.2K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 37.6K Read-Only Boards