-
Cost of removing 5 trees
I have just bought a house which has 5 problem trees that need removing. They have been topped but they are a problem for myself and my new neighbours. I would like them removed so I can grass the garden. They range in truck diameter, 2 are around 12" and 3 around 8".How much should this cost? Thank you.
-
Integrated fridge has broken, replacement question
I wonder if you can help, my integrated fridge has broken. It is on, light works etc, but doesn't cool! It was bought from MFI 12 years ago by the previous owners of the house. My question is, are all integrated fridges the same size. Also, do they all have the same fixings for putting the cupboard door on, or do they all…
-
need quite a bit of carpet underlay
Its probably been asked before, but where is the best place to get some good underlay on internet we have a old house and the floors are not the best, also were in the north of scotland so postal charges is a problem, Thanks Suzy
-
Making my shed water tight
Hi all I bought a 12 x 8 shed last year to serve as my workshop. Unfortunately the building is far from water tight and thanks to the very damp winter I now have some rusty tools! There were water marks down all 4 walls and the ceiling too :mad: How can I now make it water tight so I can insulate and board the inside up?…
-
how much it would cost to move a ceiling light & and put new lights in?
Hi Any ideas on how much it would cost for an electrician to move a ceiling light about 1 metre? At the moment we have 2 horrible ceiling fan lights :tongue: , that I would need taken out, and new lights put in. I know I need to phone and get some quotes, but just wanted a rough idea, Thanks :beer: Lou :D
-
Ideas for guest bed
Because I'm now going to be working from home much more I need to find more space in the spare room for office kit, so the single bed that is in there will have to go - unfortunately it takes up too much room. Has anyone seen any good offers or can recommend a folding etc bed that would be reasonably comfortable for an…
-
Damp problem - any recommendations?
Hi We have recently moved into our first home which has a slight damp problem. We have had a full damp and timber report done and are now looking to rectify the problems identified but we don't know who to go to? Has anyone got any recommendations for a god reputable company in the Merseyside / North West area?? Thanks Di
-
Ground Reinforment
Hi I am looking for some advise please I have a builders yard on a farm, which we rent very cheaply, the ground is a mixture of old soft concrete where the previous person had fires, and some old MOT type-1, we have a forklift, which weights 3.75 ton and and carry 2.5 ton, so can weigh 6.25 ton. it has started to break up…
-
getting old rawlplugs out
Hi, There seems to be loads of holes in my walls with rawlplugs in. I've been able to hook some of them out to fill the holes, some others though just don't stick out enough to be able to rouk them out. I want to get the wall flat for painting and there is just a bit of lip that I can't ger rid of. I've tried just filling…
-
Cheapest way to insulate loft?
Wow. I've learnt so much along this journey of insulation! Thermal blankets, Fibre Glass, Celotex, (and it's apparent useless reflective layer) double bubble wrap, insulation paints and much more. There are building regulations that have to be met, but what combination of insulations are best, cheapest and eco friendliest!…
-
best deals on washing machines???
anyone help with what are the best deals around just now on washing machines. my daughters one is just about to go to that great washing machine scrapyard in the sky.xx
-
advise - my guttering in neighbours garden
I live in an upstairs maisonette, I share a rear garden with the occupants downstairs and the guttering that leaves my property is attached to a wall in their side of the garden, I've come home tonight to find they've been decorating their garden and have tied stuff onto the guttering, im guessing they shouldn't without at…
-
Solid wood worktop supplier recommendations
Hi all, Trying to get some recommendations for a supplier of good, but reasonable solid wood worktop. We're based in Knaresborough, but suppliers from Leeds, Bradford, Harrogate area would be great. Would consider buying online too if anyone has any positive experience from a supplier. All help much appreciated! Thanks PS.…
-
Joining different diameter pipes
Hi folks Drainage pipe from kitchen sink, once past u-bend etc, goes out through wall, and then angles down (no more than 45 degree angle), to collector that then sends it under the concret to the main outflow. The outside drainage pipe is cracked and leaking badly :o , though not at the top, where it comes through the…
-
Choosing a kitchen
It's a big investment isn't it? So it has to be something that will last, that you will continue to like and that will not go horrendously out of fashion. On he other hand, we plan on staying here, so it can be something that we like, we don't have to consider selling on. I definitely want slab fronts - hate the dust…
-
Repainting over anaglypta
Hi everyone, I've just moved into my first house, so this is really a first-time DIYers question. The hallway, landing and second bedroom have anaglypta wallpaper beneath the picture rail. I like the wallpaper pattern, but hate the colour it's been painted which is a rather unpleasant shade of purpley-brown, which I think…
-
How to clean stainless steel ?
We've got a stainless steel splashback behind our oven hob, and it inevitably gets a fair dollop of muck, spills, grease etc on it. What's the best way to clean it ? I've tried Mr Muscle kitchen cleaner, plain washing up liquid, some metal polish, even WD40, but nothing seems to make it come up nice and shiny. I did toy…
-
kitchen floors!
hi all. we are having a new kitchen put in next week, and have opted to do the floor ourselves...:eek: a few qs!! should we do it b4 or after instillation? we are putting the floor onto concrete, what would be the best type of floor? do you have to do under the units? hope someone can help!! ta.
-
Boiler programmer replacement help
More of a question to any plumbers on here I think. I have an old ( but reliable) back boiler , it has x2 flow and returns circuits , 1 for DHW and 1 for the CH coming from the rear of the boiler , and each circuit has a separate pump, So my question is , when I replace my faulty programmer do I have to interlock the CH…
-
Bathroom Refit Quote - Fair price?
Hello all, I was wondering if anyone could offer me any advice about the following quote I have received? My bathroom is fairly average sized, neither pokey nor spacious. I have asked a couple of firms for quotes via websites based on feedback system and customer ratings. I understand tiling is expensive so requested a…
