EON energy fit meter What is yours reading?

wideload

can anyone help me uninstall this software. I have lost the will to live getting this thing to work. Cant even get rid of it getting error message "The Install has insufficient priveleges to modify this file: C:\Program Files\E.ON Energy\E.ON Energy Fit Software|EON_Project.mdf.

After numerous problems loading the driver my unit will not download data to my pc. I wasted hours on this.
Its a fantastic own goal when you cann wind people up with something that is free

Former_E.ON_Company_Representative:_Malc

Hi wideload

I'm sorry you've been having problems with your monitor. Must admit, I've not come across your particular difficulty before but, then, I'm no techy.

If you're still having this problem, I'd have a word with our help desk and see what they say. Contact details are in the info pack provided with the monitor.

Malc

slenderkitten

i got mine today but having problems it shows 1 electric on the thickest cable (grey) tried a slightly smaller on it says 1 & 2 electric even tried the other two smallest cables but on all of them the monitor says 0 wattage, tried putting in the

when i first pressed the hole on the transmitter there was no RAPID red flash just a flash every 5 seconds or so which is how its doing it now.

help

i have pictures of my monitor and electric fuse box and where i put the claw, dont know if i can put them here?

billy5000

mines reading

4.58kwatt
15 per day
458 per month

this reading is comming from my boiler spiking every 30/60 min and lasting 30/40 on!

slenderkitten

billy5000 wrote: »

mines reading

4.58kwatt
15 per day
458 per month

this reading is comming from my boiler spiking every 30/60 min and lasting 30/40 on!

at least you can get yours working, i cant

gethro

only_mee wrote: »

For those that have them just post what your readings are.

Two TV's on,sky+ and sky box, Router, fridge freezer.

Readings now are

Energy now 27 watt
cost £1.92 per month 6p per day

Telly ,Cable box, PC ,Printer, Router ,Fridge, 2X Freezers just put the oven on for my Pizza
readings are
3.27 KWatt
Cost £232 Per month

Better turn the oven of as soon as my Pizza done

gethro

slenderkitten wrote: »

i got mine today but having problems it shows 1 electric on the thickest cable (grey) tried a slightly smaller on it says 1 & 2 electric even tried the other two smallest cables but on all of them the monitor says 0 wattage, tried putting in the

when i first pressed the hole on the transmitter there was no RAPID red flash just a flash every 5 seconds or so which is how its doing it now.

help

i have pictures of my monitor and electric fuse box and where i put the claw, dont know if i can put them here?

You should put the claw on the wire which comes from the Meter into the fuse box,it should have a red tag (live)on it where it comes from the meter.
Mine flashes ever 5 second which means ( i think ) that it is set up right and transmitting to the display.

slenderkitten

gethro wrote: »

You should put the claw on the wire which comes from the Meter into the fuse box,it should have a red tag (live)on it where it comes from the meter.
Mine flashes ever 5 second which means ( i think ) that it is set up right and transmitting to the display.

i was just looking at the box outside my flat should it be these cables and not the ones inside my flat??

macman

Attach it below the meter where the cables exit to your CU.
But if your meter is in an external meter box, then possibly the solid wall is preventing the receiver from picking up the signal?
If so, try putting it on the same cable on the inside wall where it enters the house on it's way to your CU.
You won't get a reading until the transmitter has synched to the display unit.

slenderkitten

macman wrote: »

Attach it below the meter where the cables exit to your CU.
But if your meter is in an external meter box, then possibly the solid wall is preventing the receiver from picking up the signal?
If so, try putting it on the same cable on the inside wall where it enters the house on it's way to your CU.
You won't get a reading until the transmitter has synched to the display unit.

what is CU

i tried the cables inside my flat, do you mean try the ones outside??