BT I-Plate promises to speed up ADSL connections by up to 60%; will it work for you?

kwikbreaks

If you are fitting an iPlate there is no need to remove ring wires.

On the BTw system you get set an "IPprofile rate" based on the sync rate ....

SYNC rate Data rate
288 - 575 250 Kbps
576 - 1151 500 Kbps
1152 - 1727 1.0 Mbps
1728 - 2271 1.5 Mbps
2272 - 2847 2.0 Mbps
2848 - 3423 2.5 Mbps
3424 - 3999 3.0 Mbps
4000 - 4543 3.5 Mbps
4544 - 5119 4.0 Mbps
5120 - 5695 4.5 Mbps
5696 - 6239 5.0 Mbps
6240 - 6815 5.5 Mbps
6816 - 7391 6.0 Mbps
7392 - 7967 6.5 Mbps
7968 - 8127 7.0 Mbps
8128 7.15 Mbps
http://www.dslzoneuk.net/adslmax_explained.php

Unfortunately moving from 2.9 to 3.2 Mbps sync won't result in any increase but the move was still beneficial as you are less likely now to drop back into a lower band

DonnyDave

Thanks for you help kwikbreaks. I've just run the BT Speedtester and it says my IP Profile is 7150Kbps.

The few times I've checked my sync speed since making the changes with my wiring, it has been 8096Kbps.