Linksys VOIP Router help!

robert_harper_2000

After typing in ****
100#
key key key o e

robert_harper_2000

BexTech wrote: »

You could also connect the SPA directly to the PC Ethernet port, check under your operating system what IP is assigned.

Though first make a note to what IP address range the router is dishing out.
Then enter that to see if it can connect.

What do I do here? I'll connect the SPA ethernet port? to the computer ethernet port? whilst leaving the other SPA internet port connected to the router thernet port 1 - correct?

BritBrat

Deleted I was wrong

robert_harper_2000

but before this I should get the ip address range. To do this I type cmd in the run and ipconfig in the dos program? Is this correct

Then connect the thingys as above?

robert_harper_2000

You are correct I had the ethernet connected to the router but have now connected the Ethernet port on the SPA to the Ethernet port on my computer

Shall I do the reboot now
turning on in the order
router 60 seconds computer 60 seconds spa

BritBrat

You are correct I had the ethernet connected to the router but have now connected the Ethernet port on the SPA to the Ethernet port on my computer

NO The VOIP device does not connect to your computer


Computer connects to the router using an ethernet lead.


Router connects to the internet with a phone cable

BritBrat

Deleted wrong info

robert_harper_2000

also connect the RJ11 from Phone port on SP to Phone base yes?

robert_harper_2000

Only the power light comes on the SP3102 and that flashes

BritBrat

Only the power light comes on the SP3102 and that flashes

If its flashing something is wrong. It may flash at start then go stable. I am just trying mine to see what happens.

MINE IS FASHING WITH NO CABLES CONNECTED

CONNECT THE ETHERNET CABLE AND IT STOPS FLASHING. So if it's fashing then it must be a problem with the network connection.

Try with the device powered up with no other cables connected.

The phone you are going to use for VOIP connects using the base unit (Digital) to Green phone port.

The other green Line port on the ouside is for a normall telephone line, or at least thats how I see it (DONT USE THAT FOR NOW)