Linksys VOIP Router help!

robert_harper_2000

~This perhaps
http://www.broadbandbuyer.co.uk/Shop/ShopDetail.asp?ProductID=3508

So if I return the ones I have and get these?

Thanks, goodnight
"Ouch! I'm just coming"

BritBrat

Yes that will work as that is what I have so long as you have Ethernet ports on the router.

What I am not sure of is the device you have the same (an adaptor) or is it a router/VOIP adaptor.

robert_harper_2000

I have ethernet ports on the VOIP router but it is a router as well as VOIP not just an adpator. If this is making sense.. I shall also call broadbandbuyer to confirm

robert_harper_2000

Apparently it can be used as both a router or just adpator. I have written it all down and will let you know if it works tonight

BritBrat

OK, sounds good.

robert_harper_2000

so far I still have an Internet connection but can't seem to access the admin for this new box. BritBrat! Where are you lol

robert_harper_2000

VOIP box
Internet port
Ethernet port

To get the the admin on the VOIP Box
do I plug from the wireless router ethernet port to the internet or ethernet?
and
thus plug from the computer ethernet to the ethernet on the VOIP box

? neither seems to work.. .what am I doing wrong ? Yesterday I managed it lol today it has got worse!

robert_harper_2000

Show icon saying little or no connectivity..

robert_harper_2000

I can't connect to the admin panel on the VOIP box

BritBrat

Plug the SPA3102 into the mains and power it up, do not worry about it being connected to the router at this stage.

Now attached a base unit of a digital phone to the SPA3102 and use the manual to find the codes to enter on the phone to access the SPA3102 and get the IP of that device, make a note of the IP address.

To access the SPA3102 menu from the phone:

Dial **** as shown on page 15 of the manual.

Then dial 110 and it should tell you the IP, write it down.

The above will make sure the device has booted and the phone connection is OK.

Post back if you can do that and we will move to next stage.