37 inch HD ready LCD with HDMI - Under £500

AceCobra

All the answers appear to be yes ut if its wall mountable it should have a vesa type plate at the back or bolt inserts. I can't see anywhere on the pictures for that.

Maybe its got some strange way to be mounted but I can't find a Hannspree mount anywhere

Geoggy

AceCobra wrote:

All the answers appear to be yes ut if its wall mountable it should have a vesa type plate at the back or bolt inserts. I can't see anywhere on the pictures for that.

Maybe its got some strange way to be mounted but I can't find a Hannspree mount anywhere

looks like there are 4 holes on the back of the unit here:

http://www.misco.co.uk/applications/SearchTools/item-details.asp?EdpNo=266017&Tab=1&NoMapp=0

i assume its vesa compatable?

AceCobra

Those look like bevels to hold the case in place? arnt they much to wide for a vesa type fitting?

Geoggy

difficult to tell isnt it ?

is see ahll has disappeared now - probably to busy watching his new tv!

ahll

I dont have sky so just testing it with the arial. I am now playing a DVD and I have to say I it looks ok to me

There does seem to be 4 screw size holes in the back maybe they are for the wall mounting.

Does anyone recommend anything I should specifically test for ?

Geoggy

re wall mounting;

have a look here

http://europe.hannspree.net/filectrl/Xv37_JT02-37E1-000G_specs_v1.0.pdf

and if still i doubt send a mail here and ask for a recommended bracket

info.europe@hannspree.com

re testing - bit difficult ot say really without knowing what kit you have and how it is connected.

if you only have dvd and its connected by scart - how does that look? how do the blacks look in dark scenes and is there any motion blurring.

its a pity you dont have a HD source to connect to the set. For eg a laptop where you could download hd movie trailers and play them on the tv, or an xbox 360.

its an OK on these that is making me hesitate.

ahll

I am trying to get my nintendo 64 to work on the TV (not used it for a few years). Should I still be putting it into the arial socket ? Do I need to be in any specific mode to see it ?

AceCobra

Well going on the American reviews I think its going to be spot on. I'll be connecting my non HD sky with scart/rgb. I don't have a HD upscalling dvd player but i'll prob get the denon. I'll also be testing with my PC on DVI/HDMI and VGA. I've ordered a rgb cable for my WII but that'll be 576p only.

I can almost taste the 300 HD trailer :P

AceCobra

ahll wrote:

I am trying to get my nintendo 64 to work on the TV (not used it for a few years). Should I still be putting it into the arial socket ? Do I need to be in any specific mode to see it ?

Its a long time since I seen my N64 but if your using an RF connection you'll need to "Tune" it using the scan function.

AceCobra

Bored said:

---

I am ready to pull the trigger on this QAM or no QAM but I can't tell if you can wall mount this thing. Anyone that has a 32" or 37" verify that these TV's can be wall mounted?

Thanks!

---

The Hannspree site says the following for the 32 and the 37:

Wall Mountable VESA 200mm x 200mm or 200mm x 400mm

Message edited by: GooberedUp on 2007-02-12 15:12:07 CST


From an American forum. Hopefully thats that concluded.