We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Which Broadband is the most Reliable and Fastest out of these 3 ISP's?

13

Comments

  • bery_451
    bery_451 Posts: 1,897 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    Spookieuk wrote: »
    Maybe?

    It could be poor LLU equipment, a loose copper pair, water dripping on to your distribution point or you were just unlucky enough to develop a fault at the time of the switch. That's ruling out there isn't any problems in your home environment.

    If you're worried get a line test run by tech support. If there is a fault on outside of your home and it's not related to the LLU equipment you will carry it over to your next CP.


    Isn't the LLU equipment is in my local exchange not in my home environment like you said?
  • As long as there is no fault conditions with either the line, the exchange equipment, or the router, then they should both as fast and reliable as each other.

    This would be true if capacity in the ISP's links from their backhaul network and capacity in their links to the rest of the Internet were not also factors. Under-provisioning in either of those would cause slowdowns at peak times and would vary between ISPs sharing the same backhaul provision.
    Proud member of the wokerati, though I don't eat tofu.Home is where my books are.Solar PV 5.2kWp system, SE facing, >1% shading, installed March 2019.Mortgage free July 2023
  • JJ_Egan
    JJ_Egan Posts: 20,281 Forumite
    Part of the Furniture 10,000 Posts Name Dropper
    bery_451 wrote: »
    Isn't the LLU equipment is in my local exchange not in my home environment like you said?


    Yes but you also need to rule out problems within the home .

    The question you keep asking is basically unanswerable a question of try PN or Sky .You could of course go to one of the more dedicated expensive suppliers .
  • macman
    macman Posts: 53,129 Forumite
    Part of the Furniture 10,000 Posts Name Dropper
    edited 2 February 2015 at 7:27PM
    bery_451 wrote: »
    In terms of reliability and speed.

    Speed has nothing to do with the ISP: it's largely determined by distance from the exchange, and quality of the line. Neither of those factors are under the control of your ISP, nor do they vary if you switch.
    Reliability should not vary, as it's the same local loop.
    The primary difference between the two is that Sky is LLU and Plusnet is not.
    No free lunch, and no free laptop ;)
  • bery_451
    bery_451 Posts: 1,897 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    Ok I am switching from Talktalk to PlusNet.


    Does this require a engineer visit to my home?
  • No






    (filler)
  • bery_451
    bery_451 Posts: 1,897 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    No






    (filler)


    I thought talktalk is llu and plusnet isn't so how the switch will happen without hardware changes if both of these ISP's use different hardware?
  • macman
    macman Posts: 53,129 Forumite
    Part of the Furniture 10,000 Posts Name Dropper
    The 'hardware' inside your home does not change, apart from the router, which is self-install, if you are using Plusnet's.
    LLU/non LLU is an exchange function, nothing is any different on the local loop.
    But you will still be asked to provide access on the day in case there are any difficulties and the OR engineer needs to test the line. But normally the work is done at exchange and street cab without the need for a visit to the property.
    No free lunch, and no free laptop ;)
  • bery_451
    bery_451 Posts: 1,897 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    macman wrote: »
    The 'hardware' inside your home does not change, apart from the router, which is self-install, if you are using Plusnet's.
    LLU/non LLU is an exchange function, nothing is any different on the local loop.
    But you will still be asked to provide access on the day in case there are any difficulties and the OR engineer needs to test the line. But normally the work is done at exchange and street cab without the need for a visit to the property.



    Ok from talktalk to plusnet an engineer is still required to come to my local exchange to do something to the hardware there.


    That means I should see a difference in reliability any maybe speed if engineer is doing something hardware wise at my local exchange right?
  • mije1983
    mije1983 Posts: 3,665 Forumite
    Part of the Furniture 1,000 Posts Combo Breaker Name Dropper
    bery_451 wrote: »
    Ok from talktalk to plusnet an engineer is still required to come to my local exchange to do something to the hardware there.


    That means I should see a difference in reliability any maybe speed if engineer is doing something hardware wise at my local exchange right?


    Not necessarily. The signal still comes through your phone line which of course remains the same. If the issues you have at the moment are because of your internal wiring, long distance to the exchange, or poor quality phone line, then you probably won't see much difference.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 352.1K Banking & Borrowing
  • 253.6K Reduce Debt & Boost Income
  • 454.2K Spending & Discounts
  • 245.1K Work, Benefits & Business
  • 600.7K Mortgages, Homes & Bills
  • 177.5K Life & Family
  • 258.9K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.