Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
PS3 Nat Settings
Comments
-
I don't know if thats the routers address, thats the one we put in the ps3.
Does it need to be the same as the ps3? Sorry how do I find the router ip address, I can see the internet ip address. I have to go out soon, so will have to continue later.0 -
As earlier ^^^debitcardmayhem wrote: »Ok I have tidied it a bit so others can see it better.;)
That seems ok, so Is your router address 192.168.1.1 ? and you have the PS3 set to 192.168.1.100 ?
The easiest way to tell for your router is to do this
press start then run and enter cmd and press enter (or press windows key and r together and enter cmd in the run box)
in the black window that comes up enter ipconfig /all
Then look for the line that says Default Gateway and say what it is it should be 192.168......
I will be here got to find the manual for the iron, promised the OH to do some trousers today:D4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed 5.07 + Octopus Intelligent Flux leccy
CEC Email energyclub@moneysavingexpert.com0 -
I have vista doesn't have run when i click start.0
-
I have vista doesn't have run when i click start.
Windows Key and R together
Edit, or from your router go to Attached devices .... that may give us a clue....4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed 5.07 + Octopus Intelligent Flux leccy
CEC Email energyclub@moneysavingexpert.com0 -
Going to attached devices via the router the only thing on now is HOME which i presume is the laptop, same ip address but ending in 3. Now before when I clicked on attached devices there was something else as well, sure it was the ps3.0
-
ok did the run thing, where it says default gatway is nothing, underneath netbios or something says disabled.0
-
Sorry under ethernet adaptor there is default gateway is says 192.168.1.10
-
Going to attached devices via the router the only thing on now is HOME which i presume is the laptop, same ip address but ending in 3. Now before when I clicked on attached devices there was something else as well, sure it was the ps3.
So your laptop is 192.168.1.3 Ok then portforward.com gives a tutorial on setting up the PS3 to static, follow that then check on attached devices afterwards
http://portforward.com/networking/staticip-ps3-playstation-3.htm
edited remember Set the PS3 to 192.168.1.1004.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed 5.07 + Octopus Intelligent Flux leccy
CEC Email energyclub@moneysavingexpert.com0 -
Set the PS3 to 192.168.1.1004.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed 5.07 + Octopus Intelligent Flux leccy
CEC Email energyclub@moneysavingexpert.com0 -
Ok thanks will have to try that later this evening, thanks for all your help, hope this works before I go insane!0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 355.9K Banking & Borrowing
- 254.9K Reduce Debt & Boost Income
- 456.2K Spending & Discounts
- 248.4K Work, Benefits & Business
- 606.1K Mortgages, Homes & Bills
- 179K Life & Family
- 263.9K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards
