PLEASE READ BEFORE POSTING

Hello Forumites! However well-intentioned, for the safety of other users we ask that you refrain from seeking or offering medical advice. This includes recommendations for medicines, procedures or over-the-counter remedies. Posts or threads found to be in breach of this rule will be removed.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

cleaning venetian blinds.......

Options
1234568»

Comments

  • probably not much help but my husband takes them all outside and hoses them every so often
  • tinamoo
    tinamoo Posts: 15 Forumite
    I have Venetian blinds up in the living room that look great but are not the best quality if I am honest. They are a pain to clean. I bought one of those cleaning tools from the 99p shop, but because of the quality of the blinds the slats bend too much when I use it to do any real cleaning.

    I know that the best solution would be to take them down and clean them that way but I am physically unable to do that.

    Does anyone have any tips for me?
  • Pink.
    Pink. Posts: 17,650 Forumite
    10,000 Posts Combo Breaker
    This thread should help:

    cleaning venetian blinds.......

    I'll add this thread to that one later to keep the suggestions together.

    Pink
  • nettles77
    nettles77 Posts: 518 Forumite
    Just got new metal venetians that look like wood effect, have seen many tools to clean them just wondering are some better than others or what else maybe is best? TIA
  • Linda32
    Linda32 Posts: 4,385 Forumite
    Part of the Furniture 1,000 Posts Combo Breaker
    I've had these blinds before. You don't need any special tools but they do take alot of work, (sorry) I would say at least 3 times a week they will need dusting. Just wrap a duster around you fingers and wipe along the blind.

    I surpose you could quickly do a blind every other day rather than all of them at the same time.

    They do catch the dust, I'm afraid. If you let it slip then you can use a glove on your hand and dip in hot soapy water and wipe you fingers along each blind.
  • adouglasmhor
    adouglasmhor Posts: 15,554 Forumite
    Photogenic
    A clean odd sock over your hand - best tool for the job.
    The truth may be out there, but the lies are inside your head. Terry Pratchett


    http.thisisnotalink.cöm
  • Eenymeeny
    Eenymeeny Posts: 2,015 Forumite
    Part of the Furniture 1,000 Posts Photogenic
    I once cleaned a whole houseful of blinds left by the previous owner when we first moved in, then some kind person told me that you can take them off and swish them in water and bio detergent in the bath. Be careful to line the bath with a bath sheet or big towel though in case you scratch the bath.
    I reckon this is a kind of Spring cleaning job though, I usually give them a flick over with one of those nylon 'feather dusters' and kid myself that all the dust sticks to the mop by static power...
    The beautiful thing about learning is nobody can take it away from you.
    Thanks to everyone who contributes to this wonderful forum. I'm very grateful for the guidance and friendliness that I always receive from you.
    :A:beer:
    Please and Thank You are the magic words;)
  • Hi all,
    First off it's important to separate cleaning and dusting. Kitchens and bathrooms are best avoided with Venetian blinds. The rest of the home now few smoke should in mean that blinds require no more than dusting,no mean feat if you have a house full.
    Forget socks on hands,multi fingered cleaners and anti static wipes you will be just wasting your valuable time. Every item I have tried and looked into until recently just pushes the dust around or into the air so it can come right back plus it dirties the ladders.
    I recently developed a vacuum brush that pushes on the blind blade on top and below is then moved along the blind blade. One pass and 100% of the dust and any cob webs are gone and nothing to atmosphere! I can dust a blind about 3ft x 4ft 26 2" wide blades in a few minuets effortlessly. Turn it on it's side and you can finish by dusting the sill, job done!
    None of the big boys are interested and I can't spend thousands on tooling or on patents so I am now considering making to order using simple readily available materials so it wouldn't look like a vacuum tool from a manufacturer more diy but most importantly it would beat anything out there hands down. Cleary reading all the threads on this there appears to be a damnd for a tool that works.
    I would appreciate any feedback on this. Thanks, R
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351.1K Banking & Borrowing
  • 253.2K Reduce Debt & Boost Income
  • 453.7K Spending & Discounts
  • 244.1K Work, Benefits & Business
  • 599.2K Mortgages, Homes & Bills
  • 177K Life & Family
  • 257.5K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.