📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

OWL Wireless Energy Monitor - your findings?

Options
13468914

Comments

  • Sadly not ;) I think it was either an offer for new customers, which we were at the time, or pensioners, which we are all the time :D
    'Better to ask a silly question than to make a silly mistake' Elliebee's Mum ;)

    Avon Lady 2007-2010
  • Altarf
    Altarf Posts: 2,916 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    Elliebee wrote: »
    wondered if anyone else has worked out how to set the cost when the tariff is a higher amount for the first 900 kwh then a lower amount after that?

    Leave it at the higher charge, and treat the difference between "normal" rate and the higher rate on the first 900 kwh as a standing charge (which is in effect what it is), unless you are ever likely to use less than the 900 kwh.
  • is electric not 125kwh per 1/4 so 500kwh per year not 900kwh
    remember it is nice to be important
    but more important to be nice ;)
  • My tariff info definitely says 26.something for the first 900 kwh then 10.something after that (I'm with EON) :confused:
    'Better to ask a silly question than to make a silly mistake' Elliebee's Mum ;)

    Avon Lady 2007-2010
  • willis
    willis Posts: 123 Forumite
    Part of the Furniture Combo Breaker
    I've just got an OWL and I love it! :)
    I have 2 questions though and wondered if anyone could please help...

    Can you please give me an example of your 'normal' rate of kw (on the energy mode) and what is on in your house to get this reading? Just want to check mine isn't miles off (I know it will vary loads between houses though)

    We have 2 tariffs: an overnight tariff and a daytime one. I have set this with no problems. However, our 'overnight' rate also applies all weekend (including weekend daytime) - is there any way I can set this?

    Thanks!
  • savemoney
    savemoney Posts: 18,125 Forumite
    Part of the Furniture 10,000 Posts
    I assume it was the Daily Mail offer back in Sept/Oct where you collected DM coupons, you didnt need to be a BG customer
    Are British Gas now providing free Owl energy monitors to their customers?
  • Please can someone advise me where I can get one of these OWL devices?

    Thanks

    :)
    Failure is only someone elses judgement.
    Without change there would be no butterflies.
    If its important to you, you'll find a way - if not, you'll find an excuse ! ~ Easy to say when you take money out of the equation!
  • savemoney
    savemoney Posts: 18,125 Forumite
    Part of the Furniture 10,000 Posts
    I assume you mean free as there easy to get online at a cost, even Argos sell them, dead easy to set up

    http://www.argos.co.uk/webapp/wcs/stores/servlet/Search?storeId=10001&catalogId=1500001501&langId=-1&searchTerms=owl&Submit=GO+%3E

    £30 online on some places, Argos almost £35

    £23 from Amazon seller plus £4 postage

    http://www.amazon.co.uk/Owl-CM113-Wireless-Electricity-Monitor/dp/B000XT1RM8

    Not sure what model as they have recent released a new model
  • willis
    willis Posts: 123 Forumite
    Part of the Furniture Combo Breaker
    The latest model is the CM119. The CM113 is the older model. I can't remember all of the differences but one is the memory function to see long term use of electric
    Just so anyone knows what to look for it if doesn't say the model number, this one is the CM119:
    http://www.amazon.co.uk/Owl-CM119-Electrisave-Mk2-Electricity/dp/B000LQ79Q6/ref=dp_cp_ob_ce_title_2

    and this one is the older one
    http://www.argos.co.uk/webapp/wcs/stores/servlet/Search?storeId=10001&catalogId=1500001501&langId=-1&searchTerms=owl&Submit=GO+%3E
  • :huh: Regarding the Owl CM119, I have set the device up, but as far as I can tell it's not maintaining the settings that I have put into it ie. the voltage & the unit rate.

    When I go back into the setup to look through the current settings (expecting to see the last ones I put in) it says the default settings instead ie. 230 volts & 10.50 Unit rate (Not my 240 volts & 9.10 Unit rate) as if it has totally disregarded what I last entered.

    Please could someone tell me if the unit is faulty or not & what to do if it isn't?
    I am only using Tarrif 1.

    Thanks.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351.1K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.6K Spending & Discounts
  • 244.1K Work, Benefits & Business
  • 599K Mortgages, Homes & Bills
  • 177K Life & Family
  • 257.4K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.