Which mattress? (merged threads)

Quark_GB

fletch3163 wrote: »

Have I lost a thread? I'm sure I had a big ish post the other day. Where's it gone? It wasn't being offensive or anything. Gee Whizz. I've never been censored before. Am raging!!

Join the Club!!!

(:mad: ) :rolleyes: .
.

TiTheRev

It was probably considered to be against advertising rules

We are now a sticky though

TomsMom

TiTheRev wrote: »

It was probably considered to be against advertising rules

I'm sure you're right Ti, I remember reading the post praising a certain firm and a certain person but Fletch probably didn't realise that would be construed as advertising. Shame we can't give praise in those circumstances.

We are now a sticky though

That's fantastic. I've read this thread from the start and have learnt so much. I now know what to look for when I need a couple of new beds in the not too distant future and I also know where I'll probably be getting them.

TiTheRev

TomsMom wrote: »

I'm sure you're right Ti, I remember reading the post praising a certain firm and a certain person but Fletch probably didn't realise that would be construed as advertising. Shame we can't give praise in those circumstances.

Indeed, if he didnt use the forum it would merely be recommendation :rolleyes:

"TomsMom wrote:

That's fantastic. I've read this thread from the start and have learnt so much. I now know what to look for when I need a couple of new beds in the not too distant future and I also know where I'll probably be getting them.

...but don't mention who, just in case

Tempy

Fantastic timing finding this topic as I HAVE to buy a new matress in the next few days so it arrives before the end of next week.

I've not read all the posting here, so I hope someone can give me a bit of a run down if I explain my needs and what I have as a base?

The base/frame (which the matress will sit upon) is actualy a metal grid of 1/8" steel bars making up a square grid of 2" x 2" holes over the entire base.

From what I have read, having 2" square holes means a pocket sprung matress (unless it's double sided covered) will be no good as unless I put something else in place the pocket springs will not be supported.

However, I use my bed for more than just sleeping on !!!!

No, not that (well, some of that!!) but I mean, I may lay on it to watch TV, or Lean on it (kneeling on the ground) to read a book, so it's not JUST sleep usage.

Perhaps that may mean a particular type would be better?

Not sure if we are allowed to post links here (so I won't) but I have found a (what looks like) good online shop with free 24 Hour Matress delivery.

They offera very large range of matresses (should that be Matri ?) for around the £200 mark which I know people here will think is too cheap but it's about my budget I'm afraid.

One thing. I don't understand why some matresses are like a relief map of the himalayers on the surface, with giant lumps and crators, whereas others are almsot smooth.

why would anyone want a massivly lumpy bed surface to lie on?

An (going back to my usage as outlined above) which type take the most abuse, eg sitting on the edge, or standing, or leaning up with elbow pressing in one spot?

To be honest, I've been sleeping on a Futon (solid thing filled with like carpet Underlay) for the past 10 years!!! so perhaps anything will be luxury!

Although the futon has (over time) moulded itself to my contours.

Really appreciate advice.

Thanks

Tim_Deegan

Tempy wrote: »

Fantastic timing finding this topic as I HAVE to buy a new matress in the next few days so it arrives before the end of next week.

I've not read all the posting here, so I hope someone can give me a bit of a run down if I explain my needs and what I have as a base?

The base/frame (which the matress will sit upon) is actualy a metal grid of 1/8" steel bars making up a square grid of 2" x 2" holes over the entire base.

From what I have read, having 2" square holes means a pocket sprung matress (unless it's double sided covered) will be no good as unless I put something else in place the pocket springs will not be supported.

However, I use my bed for more than just sleeping on !!!!

No, not that (well, some of that!!) but I mean, I may lay on it to watch TV, or Lean on it (kneeling on the ground) to read a book, so it's not JUST sleep usage.

Perhaps that may mean a particular type would be better?

Not sure if we are allowed to post links here (so I won't) but I have found a (what looks like) good online shop with free 24 Hour Matress delivery.

They offera very large range of matresses (should that be Matri ?) for around the £200 mark which I know people here will think is too cheap but it's about my budget I'm afraid.

One thing. I don't understand why some matresses are like a relief map of the himalayers on the surface, with giant lumps and crators, whereas others are almsot smooth.

why would anyone want a massivly lumpy bed surface to lie on?

An (going back to my usage as outlined above) which type take the most abuse, eg sitting on the edge, or standing, or leaning up with elbow pressing in one spot?

To be honest, I've been sleeping on a Futon (solid thing filled with like carpet Underlay) for the past 10 years!!! so perhaps anything will be luxury!

Although the futon has (over time) moulded itself to my contours.

Really appreciate advice.

Thanks

You are right in saying that your bed isn't really suitable for a pocket sprung only mattress. However you can easily find top of the range open coil sprung mattresses for well under £200 with many on line sellers.

Tempy

Tim_Deegan wrote: »

You are right in saying that your bed isn't really suitable for a pocket sprung only mattress. However you can easily find top of the range open coil sprung mattresses for well under £200 with many on line sellers.

Thanks for the reply.

As I said, I really need to put in my order by the end of this week, so kinda in a rush I guess

We have a "Dreams" store near here, but not sure if it's really worth going and that I'd get a better deal from an online supplier (no overheads etc)

If I go down the Open Coil route..............

As just some flash advertizing and meanlingless specs mean not a lot to me.......

Is there anything I should look for in an advert for this type of matress?

Are "Open Coil" matresses still regarded as "OK" these days?

I've seen the brand "Silent Night" with the well known "Hippo and Duck" advertising their non toll together construction.

Something about it being made from one continous metal method as opposed to other methods, and no roll together.

But I don't really understand the difference they are talking about here construction wise.

Can anyone enlighten me please.

I know how pocket springs look (little coils in bags ties togther with foam either side)

But are there different ways of building the other non pocket sprung beds?

thanks for any info.


========= EDIT =============

I've just seen something called "MIRACOIL" by Silent night....

What's this then?

And any good?

TiTheRev

Tempy wrote: »

Thanks for the reply.

As I said, I really need to put in my order by the end of this week, so kinda in a rush I guess

We have a "Dreams" store near here, but not sure if it's really worth going and that I'd get a better deal from an online supplier (no overheads etc)

Do a forum search on Dreams, I doubt you'll find a good report amongst them...

Tempy wrote:

If I go down the Open Coil route..............

As just some flash advertizing and meanlingless specs mean not a lot to me.......

Is there anything I should look for in an advert for this type of matress?

Are "Open Coil" matresses still regarded as "OK" these days?

I've seen the brand "Silent Night" with the well known "Hippo and Duck" advertising their non toll together construction.

Something about it being made from one continous metal method as opposed to other methods, and no roll together.

But I don't really understand the difference they are talking about here construction wise.

Can anyone enlighten me please.

I know how pocket springs look (little coils in bags ties togther with foam either side)

But are there different ways of building the other non pocket sprung beds?

thanks for any info.

Open coil are fine for most people. They are classed 'budget', but as Tim says you can get some very good quality ones for under your budget. All they are is a meshed together layer of springs which do move together but still provide good support. Pocket sprung versions are mearly individual springs that support every contour and dont allow the 'roll together' issue.

Tempy wrote:

========= EDIT =============

I've just seen something called "MIRACOIL" by Silent night....

What's this then?

And any good?

From personal experience (and an aching back for myself and DW after owning the mattress for just over a year), do a forum search on Silentnight...again, I doubt you'll find a single good review.

Tempy

TiTheRev wrote: »

Do a forum search on Dreams, I doubt you'll find a good report amongst them...


Open coil are fine for most people. They are classed 'budget', but as Tim says you can get some very good quality ones for under your budget. All they are is a meshed together layer of springs which do move together but still provide good support. Pocket sprung versions are mearly individual springs that support every contour and dont allow the 'roll together' issue.


From personal experience (and an aching back for myself and DW after owning the mattress for just over a year), do a forum search on Silentnight...again, I doubt you'll find a single good review.

Ok, well thats my trip to "Dreams" and looking at "Silentnight" out of the window.

I could put a layer of hardboard over my metal 2" square hole grid to allow me to have a pocket sprung one. but to be honest I'm REALLY not looking at going over £300 very max for a 4ft 6" matress

Would I be better paying £200 ish for a coil sprung than trying to get a pocket sprung for around the £250 to £300 range?

Does Pocket sprung really feel THAT much differenct from a Coil sprung one?

Chalk and Cheese?

I understand you need at least 800 to 1000 springs in a 4ft 6" pocket sprung model. but again, I have seen them online with this many springs, pocket sprung for just over the £200 mark.

TiTheRev

Better quality open coil would be far better than low end pocket sprung. A decent open coil will actually be more comfortable in the long run, as pocket sprung at the cheaper end will use poor quality springs or smaller ones and wrap them in foam, but either way there's a better chance they'll use cheaper materials etc.

Saying that £300 may get you a fair pocket sprung in double if you dont use the large stores.