Stupid bloody router part 2

iwanttosave_2 · 2 February 2006 at 2:36PM

Its me again :rolleyes:

I have finally got my router set up, wired on the PC and wireless on the lappy.

Thing is I am no getting a really weak signal unless I am right next to it, I can move 4ft away in the same room and it goes to a "low signal" and often cuts out. I have tried changing channels, not tried all of them but done it about 4-5 times.

I have this router

Is there anything I can buy or do to improve the signal, I did a search but couldn't find anything

Thanking you

Oh I am on XP on both comps :beer:

chem14346777 · 2 February 2006 at 3:42PM

try raising the router off the ground for a better signal.

I take it the laptop is still in "line of sight" to the router?

iwanttosave_2 · 2 February 2006 at 3:47PM

I have put it as high as I can, although limited because of lengh of ethernet cable and yes the laptop is in line with it, I even got desperate and tried sitting parallel to the router

heatherw_01 · 2 February 2006 at 3:48PM

If you are using wires and not wireless then there should not be a problem with signal. Your computer is probably trying to use wireless instead of wired.

Edit: sorry, I see that you have one wired and one not, I thought you were only using wires

GreenNotM · 2 February 2006 at 3:49PM

Iwanntosave

Have a look see if there are anymore wireless networks in your location. Via the networks window..

Did you change the SSID ?

iwanttosave_2 · 2 February 2006 at 3:53PM

I changed the SSID and there are no more networks available

I am tring to look up the specs of my cordless phone to see if this could be the problem but can't see it being

GreenNotM · 2 February 2006 at 4:18PM

Well seems there is a firmware upgrade - do via the wire connection. More info here

What about the laptop - have you used that wirelessly before ? Are updated drivers or firmware available for wireless card ?

Have a look at the "Status" of the connection - what speed are you getting ? What protocol does it negotiate to ?

Hunnymonster · 2 February 2006 at 4:31PM

Have you tried changing the channel that the router is using ? It could be that someone else has one on a frequency that is interfering with the default.

iwanttosave_2 · 2 February 2006 at 5:14PM

GreenNotM wrote:

Well seems there is a firmware upgrade - do via the wire connection. More info here

What about the laptop - have you used that wirelessly before ? Are updated drivers or firmware available for wireless card ?

Have a look at the "Status" of the connection - what speed are you getting ? What protocol does it negotiate to ?

i have never used it wirelessly, the laptop itself is only 2 months old so I can't see it needing updating.

It seems to be behaving itself for now, the speed at the mo is stated as 18.0mbps.

star1_2 · 2 February 2006 at 5:20PM

As someone else has said you need to change the frequency that the wireless part of the router work at, the default is 11 so move it to another number and keep changing it untill the area of coverage improves.

The general problem with wireless is it uses the 2.4ghz of frequencies which is an unlicences waveband that is used by loads of other household gadgets etc .... including bluetooth devices, dect phones, video senders, some wireless keyboards, some car alarms, wireless doorbells etc .... add this together in a localised area and you could have a wireless "traffic jam" .... best to shift to another frequency and see what that does !!

:rolleyes:

iwanttosave_2 · 2 February 2006 at 5:29PM

star1 wrote:

As someone else has said you need to change the frequency that the wireless part of the router work at, the default is 11 so move it to another number and keep changing it untill the area of coverage improves.

The general problem with wireless is it uses the 2.4ghz of frequencies which is an unlicences waveband that is used by loads of other household gadgets etc .... including bluetooth devices, dect phones, video senders, some wireless keyboards, some car alarms, wireless doorbells etc .... add this together in a localised area and you could have a wireless "traffic jam" .... best to shift to another frequency and see what that does !!

:rolleyes:

As I said, I have already tried loads of different frequencies, and still no good.

Seems to be ok at the mo but I'm sure it will cut sooner or later :rolleyes:

Stupid bloody router part 2

Comments

Confirm your email address to Create Threads and Reply

🚀 Getting Started

Categories

Is this how you want to be seen?

Get our FREE Weekly email full of deals & guides - and it’s spam-free