We'd like to remind Forumites to please avoid political debate on the Forum... Read More »
The Forum is currently experiencing technical issues which the team are working to resolve. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Getting a locking wheel nut key
Comments
-
onlyfoolsandparking said:sweetsand said:George_Michael said:onlyfoolsandparking said:Was it a Robin Reliant?-1
-
sweetsand said:You clearly implied that the only concern the OP should have was someone stealing their wheels
...and you tried to undermine the OP by saying who would want to steal wheels/tyres from a car like theirs. It may be nothing to you judging by your comments
Well, it's newer than anything I own. And the first thing I did with the only vehicle we've got with locking bolts (the only one with alloys) was to remove 'em and bin 'em. Which is what I'm suggesting the OP does.but the OP is entitled to seek help
Who said otherwise? Which is precisely why I'm trying to assist the OP in resolving their issue in the cheapest and most effective long-term way. By binning the lockers, if they aren't worried about theft of the wheels.
You, otoh, seem to be here only to give half-baked non-answers and willy-wave your imaginary considerably-richer-than-yow fleet, whilst pooh-poohing anything you don't understand.and as I have stated a couple of times in response to your posts - a locking nut key is required if a wheel needs to be removed for repair etc.
Only if you have locking bolts on it. If you have a full complement of plain ones, then... no, a key is not needed.and what I said re main dealer and you don't want your thread on the bolt the lock goes onto broken/etc and that will cost a lot of money
I'm still waiting to hear using a locker-removal socket is going to damage the thread on the stud (not spindle, however you wish to spell it). It'll muller the locker itself, sure. But they're going in the bin anyway, right?0 -
AdrianC said:willy-waveQuite!There seems to be a lot of that going on here.And for that you need to shoulder some of the blame for it. Look at where it began - your opening statement - "It's a 14yo Mondeo. Is somebody REALLY going to be nicking your wheels and tyres?". If you weren't in such a rush to mock an old car and state the worthlessness of everything associated with it because this is MSE and we turn our nose up at every car older than 6 months point out the age (i'd already done that by saying 2006) and the obvious fact that they aren't £2000 alloys so the chances of them being stolen are slim then this willy waving going on likely wouldn't have happened.As i never said my car is extremely expensive and my alloys are so desirable it was pretty clear that i was just wanting the damn lockers off the car. I never asked for a recommendation on new lockers, i never mentioned putting new ones back on. All i said was i wanted these things off. It takes two to have a willy waving competition. Otherwise you're just playing with yourselfThough yes, after that comment, you have been helpful.shaun_from_Africa said:How about somewhere like this:
https://www.lockingwheelnutkeys.co.uk/single-post/2016/05/17/Ford-Mondeo-Replacement-Locking-Wheel-Nut
£45 and they state that the code isn't needed, just a clear photo of the nut.Thanks. I think i'll chance the mechanic for £45 though. I don't know if they use a standard photo for their listings but the one on that page certainly wouldn't do mine. Even still, like i said, for £45 i'll chance the mechanic.I saw a YouTube video on how to do it. I reckon i could but i have a knack of damaging things. I saw one video saying the spinners are more difficult but still can be broken off. Our mechanic must surely have had more practice than me so i'll leave it with him. Best just give him advance notice though.AdrianC said:
Assuming you're referring to wheel studs (do Mondeos even use a stud with a nut? Bolt into hub tends to be much more common), how will removing a locking nut damage the thread on the stud?I haven't seen the wheels off so i can't say for 100% but from what i've read and the pictures i've seen, yes the Mondeo has wheel studs. Now i'm not saying that is a nailed on fact as like i said i'm not 100% sure.I went down the local scrappers earlier. Literal needle in haystack job. Even if i had the car with me and not just a photo of it, it would be a case of sitting there with the bucket of keys and trying them all one by one, bucket after bucket. There were some that clearly weren't the one but others that could've been - yet i saw a minor difference.After all that i'll see our mechanic to do it. Thanks for the feedback.
1 -
AdrianC said:willy-waveThere seems to be a lot of that going on here.And for that you need to shoulder some of the blame for it. Look at where it began - your opening statement - "It's a 14yo Mondeo. Is somebody REALLY going to be nicking your wheels and tyres?". If you weren't in such a rush to mock an old car and state the worthlessness of everything associated with it because this is MSE and we turn our nose up at every car older than 6 months point out the age (i'd already done that by saying 2006) and the obvious fact that they aren't £2000 alloys so the chances of them being stolen are slim then this willy waving going on likely wouldn't have happened.As i never said my car is extremely expensive and my alloys are so desirable it was pretty clear that i was just wanting the damn lockers off the car. I never asked for a recommendation on new lockers, i never mentioned putting new ones back on. All i said was i wanted these things off. It takes two to have a willy waving competition. Otherwise you're just playing with yourselfI went down the local scrappers earlier. Literal needle in haystack job. Even if i had the car with me and not just a photo of it, it would be a case of sitting there with the bucket of keys and trying them all one by one, bucket after bucket. There were some that clearly weren't the one but others that could've been - yet i saw a minor difference.After all that i'll see our mechanic to do it. Thanks for the feedback.
Excellent response especially to that AdrianC. I raise some of the points you raised as it was unhelful and uncessary and IMO it can put people off asking questions.
ATB
x-3 -
AdrianC said:It's a 14yo Mondeo. Is somebody REALLY going to be nicking your wheels and tyres?0
-
JustAnotherSaver said:And for that you need to shoulder some of the blame for it. Look at where it began - your opening statement - "It's a 14yo Mondeo. Is somebody REALLY going to be nicking your wheels and tyres?"
No mocking was intended, and my apologies for any insult that was inferred.0 -
onlyfoolsandparking said:sweetsand said:George_Michael said:onlyfoolsandparking said:Was it a Robin Reliant?
And are happy to promote indirect disability discrimination in their family's lettings: https://forums.moneysavingexpert.com/discussion/6182341/private-landlords/p1
Originally Posted by shortcrust
"Contact the Ministry of Fairness....If sufficient evidence of unfairness is discovered you’ll get an apology, a permanent contract with backdated benefits, a ‘Let’s Make it Fair!’ tshirt and mug, and those guilty of unfairness will be sent on a Fairness Awareness course."2 -
AdrianC said:JustAnotherSaver said:And for that you need to shoulder some of the blame for it. Look at where it began - your opening statement - "It's a 14yo Mondeo. Is somebody REALLY going to be nicking your wheels and tyres?"
No mocking was intended, and my apologies for any insult that was inferred.
My advice to you is if you can't help, don't post something that mocks the OP.
You have just apologised but did not do it at the start when I picked that up but you are still in denial of what you said and that is the stance you need to change.
Thank you-4 -
sweetsand said:AdrianC said:JustAnotherSaver said:And for that you need to shoulder some of the blame for it. Look at where it began - your opening statement - "It's a 14yo Mondeo. Is somebody REALLY going to be nicking your wheels and tyres?"
No mocking was intended, and my apologies for any insult that was inferred.
My advice to you is if you can't help, don't post something that mocks the OP.
You have just apologised but did not do it at the start when I picked that up but you are still in denial of what you said and that is the stance you need to change.
Thank you6 -
It's been a few years since we had one like this.2
Confirm your email address to Create Threads and Reply

Categories
- All Categories
- 350.5K Banking & Borrowing
- 252.9K Reduce Debt & Boost Income
- 453.3K Spending & Discounts
- 243.5K Work, Benefits & Business
- 598.1K Mortgages, Homes & Bills
- 176.7K Life & Family
- 256.6K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 37.6K Read-Only Boards