📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Faulty car part from Ebay

124»

Comments

  • Geodark
    Geodark Posts: 1,049 Forumite
    Part of the Furniture 1,000 Posts
    cajef wrote: »
    Just how much do you know about car engines, a new thermostat is fitted into the existing housing in the car that is bolted to the block/cylinder head, even if fell apart internally there is no way it could come out of the housing and spray water externally everywhere unless the engine overheated and a hose blew.

    Depends on the car fella, mine is a complete unit that you need to replace. The housing and the thermostat are replaced as a single unit. Have to agree though, I can't see how a fail could spray water everywhere unless a hose popped.

    Might help if we had some pics, or were told what the car was.
  • usefulmale
    usefulmale Posts: 2,627 Forumite
    How's that relevant to my question?

    It's relevant because you need to understand the principle of false economy.

    Buy cheap, buy twice, is the phrase.

    You should have let the garage supply and fit the thermostat. Then, you would have had just one point of contact should things go wrong.

    As it is now, you are going to get bounced between the garage and the eBay seller which will only be resolved by taking the matter to court.

    Don't forget, your time and effort is not free, and you are going to expend a fair amount of both to settle this, all for trying to save a few bob.
  • takman
    takman Posts: 3,876 Forumite
    1,000 Posts Combo Breaker
    arcon5 wrote: »
    Well presumably changing a fuse doesn't involve getting dirty hands, requiring a small selection of tools and the potential of cuts depending on how accessible it is.
    Your comparison to a fuse is utter rubbish. Ignorant also

    My comparison is perfectly valid because I'm saying you don't use a professional to do simple jobs!.
    I don't get dirty hands working on my car (I wear gloves). Yes you require tools but they can be bought for less than the price of the garage labour, then used again in the future. You can potentially cut yourself during any activity, you just need to be sensible.

    I regularly do work on my cars that is a lot more involved than changing a thermostat!. I think your the ignorant one thinking that having anything done on a car it needs to be taken to a garage!
  • NotRichAtAll
    NotRichAtAll Posts: 900 Forumite
    Part of the Furniture 500 Posts Combo Breaker
    edited 2 April 2016 at 11:24AM
    takman wrote: »
    My comparison is perfectly valid because I'm saying you don't use a professional to do simple jobs!.
    I don't get dirty hands working on my car (I wear gloves). Yes you require tools but they can be bought for less than the price of the garage labour, then used again in the future. You can potentially cut yourself during any activity, you just need to be sensible.

    I regularly do work on my cars that is a lot more involved than changing a thermostat!. I think your the ignorant one thinking that having anything done on a car it needs to be taken to a garage!


    Lets be fair some people are not mechanically minded so what may seem like a simple job to you or i may not be that simple to someone else.
    Out of curiosty OP what make / year car is that the thermostat failed?
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351.3K Banking & Borrowing
  • 253.2K Reduce Debt & Boost Income
  • 453.7K Spending & Discounts
  • 244.2K Work, Benefits & Business
  • 599.4K Mortgages, Homes & Bills
  • 177.1K Life & Family
  • 257.7K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.2K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.