📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

water softner help in chosing and is this true

Options
12829313334116

Comments

  • Looks like a good machine at a good price to me.. £440 inc VAT at a number of places on the net and that includes the installation fittings. I still prefer the Autotrol 255 or Fleck 5600 valves on a water softener but the Tapworks/Eccowater softeners are good quality and reliable.
    Matt
  • vermas
    vermas Posts: 77 Forumite
    i am looking for single cylinder metered water softener that is compact- i.e under 50cm high

    what would people recommend for up to £500
  • Doc_N
    Doc_N Posts: 8,547 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Photogenic
    vermas wrote: »
    i am looking for single cylinder metered water softener that is compact- i.e under 50cm high

    what would people recommend for up to £500

    Tapworks Ultra 9 - though it may be slightly too big for you at 52.4cm high:

    http://www.tapworks.co.uk/Residential%20Products/ultra_9.aspx
  • gskgk
    gskgk Posts: 1 Newbie
    edited 6 February 2010 at 7:04PM
    Hi all,

    I am trying to get a softner for my house. I decided to go in for twin tank ones.. so got some quotes... all the quotes include the following
    - twin tank , standard installation , pressure regulator, external tap for garden, drinking water tap , water filter for drinking water.

    The different numbers are as follows
    Crown - 1150
    Twin Tec - 1450
    Aqua twin - 1300
    Kinetico 2020c- 1425

    I was thinking of crown.. but am i right in my choice ? .. pls help me
  • Hi gskgk
    Sorry I don't know much about twin tank softeners, apart from them being very expensive. There are a lot of posts going back a few months discussing the merits of different machines and also the pros and cons of both single and twin tank systems. This being a money saving web site I would have to recommend single tank systems as they are generally much cheaper and in my opinion just as good in a domestic environment.

    Regards Matt
  • gskgk wrote: »
    I was thinking of crown (£1150).. but am i right in my choice ? .. pls help me

    £1150 for a water softener and one extra garden tap? You must have money to burn! I don't think it's justified paying more than £500 for what you seek to achieve, i.e. soft water and a garden tap.
  • Doc_N
    Doc_N Posts: 8,547 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Photogenic
    gskgk wrote: »
    Hi all,

    I am trying to get a softner for my house. I decided to go in for twin tank ones..

    I think your big mistake is in going for a twin tank model. Read the thread above for comments - personally I think they're pointless and overpriced.

    I've also recommended Tapworks models as being a much cheaper (but almost identical) alternative to the tried and tested Ecowater ones. No personal axe to grind, but Ecowater has a good reputation for reliability - no point paying their prices, though, when you can buy an almost identical equivalent for more than a third less.
  • Hi Guys! Just trawling this thread to find out what`s wrong with our son`s boiler and if it may be caused by his water softener. Someone mentioned corrosion a few posts back.With regard to stainless steel, if anyone else is interested.....
    http://corrosion-doctors.org/MatSelect/rouging.htm

    Please look at .Class11 Rouge about halfway in. Scary. Is this a well-kept secret,or wot?
    :j:hello::j

  • Hi Guys! Just trawling this thread to find out what`s wrong with our son`s boiler and if it may be caused by his water softener. Someone mentioned corrosion a few posts back.With regard to stainless steel, if anyone else is interested.....
    http://corrosion-doctors.org/MatSelect/rouging.htm
    Please look at .Class11 Rouge about halfway in. Scary. Is this a well-kept secret,or wot?

    I have water softeners with stainless steel tanks. By design they are stainless steel and, after many years in use, there is no sign of corrosion. The tanks have been exposed to hard water, soft water and very high concentrations of chloride, as in the salt used during the replenishment process, yet there is no damage.
  • Hi, George.

    I take it you were not impressed by my link. Unfortunately,I never took Chemistry at school and am not likely to start now, so I have to take this kind of information on trust to a certain point. You obviously have experience in this field,so I am grateful for your input.:o

    I`m certainly no expert on boilers, or stainless steel. But something is corroding in a Potterton Powermax Boiler with a water softener (as recommended in manual) and it`s meant to have stainless steel innards. It`s still under guarantee.The radiators are apparently not leaking into the system as that would cause a change in pressure and make the boiler shut down. However, the hot water comes out reddish/orange/brown, but not all the time.We think there is a sludge of this material at the bottom of the tank, which will not drain out.
    Any thoughts you have about this would be much appreciated.:beer:
    :j:hello::j

Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351.1K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.6K Spending & Discounts
  • 244.1K Work, Benefits & Business
  • 599K Mortgages, Homes & Bills
  • 177K Life & Family
  • 257.4K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.