📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

windows 98 se internet connection via router/modem

124»

Comments

  • albertross_2
    albertross_2 Posts: 8,932 Forumite
    when you say yep but no go, could you elaborate, do you mean it is installed, and visible in device manager, without any obvious errors?

    is tcp/ip installed now, and pinging? you may need to do the winipcfg release and renew

    the 3c920 is backwards compatible with other 3c90x's (I think - 3coms numbering system does my head in sometimes, they are all similar numbers)

    Is the numbered light on on the router 1,2,3,4 ?
    Ever get the feeling you are wasting your time? :rolleyes:
  • robnye
    robnye Posts: 5,411
    Part of the Furniture Combo Breaker
    Forumite
    cant see it in the hardware profile.....

    tried winipcfg

    just flashing the bios

    will investigate more tomorrow

    thanks for your help so far....... today is another day
    smile --- it makes people wonder what you are up to.... ;) :cool:
  • Godders
    Godders Posts: 2,912
    1,000 Posts Combo Breaker
    Forumite
    robnye wrote:
    yep, but no go..... the dell website says it has a 3c920, but i cant find the drivers for it.

    I have checked the socket where the cable goes in and it is orange...... i know it should be green.

    any ideas how i can check to see if it is working ? (apart from control panel)

    Does this help?
  • albertross_2
    albertross_2 Posts: 8,932 Forumite
    Try godders suggestion.

    If it is enabled in the bios, it should either show as an unknown, working, or non-working (question,exclamation mark, or red cross) device, in device manager. If it is a question mark, delete it, and refresh.

    Try add new hardware if nothing at all is showing.

    http://www.bcuc.ac.uk/main.asp?page=2203
    Ever get the feeling you are wasting your time? :rolleyes:
  • robnye
    robnye Posts: 5,411
    Part of the Furniture Combo Breaker
    Forumite
    thanks peeps.... actually godders was on the right track.

    the nic wasnt showing in the hardware panel. but pci ethernet controller was showing as a big yellow !

    after downloading umpteen different drivers, finally managed to find one that once i clicked on the setup.exe...... bobs was my uncle.
    it loaded the driver, and all the network conenctions.... evrything is now hunky dory.
    smile --- it makes people wonder what you are up to.... ;) :cool:
This discussion has been closed.
★ ★ ★ Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 355.9K Banking & Borrowing
  • 255K Reduce Debt & Boost Income
  • 456.2K Spending & Discounts
  • 248.4K Work, Benefits & Business
  • 606.1K Mortgages, Homes & Bills
  • 179.1K Life & Family
  • 264K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.2K Discuss & Feedback
  • 37.7K Read-Only Boards
Quick Search

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.