maximum speed

laney85

yea my contracts with 02 for moby

macman

laney85 wrote: »

yea my contracts with 02 for moby

Then it really is a no-brainer. Go get your MAC now!

kwikbreaks

If you do decide to move (and it will be the best decision you've made this week if you do for sure) then don't forget to go through Quidco or TopCashBack to get the £50 cashback as well as the free months.

Here's a good explanation how...

http://forums.thinkbroadband.com/o2/t/3697111-re-cashback-free-months-etc-how.html

laney85

old


port ....... status...... TxPkts........... RxPkts....... collisions

wan..........PPPoE.........698756.........752890.. ...........0
lan ........10M/100M......5839..............3191.............. 0
wlan .....11M/55M ......722433 ..........673658 .............0


Tx B/s ....................Rx B/s

wan 5038 ...............11659
lan 61.................... 8
wlan 11721 ............4982



Adsl link .............downstream.......... upstream
connection speed .......576kbps .....288kbps
line attenuation ..........54db ...........15.5db
noise margin ............18db ................27db


new
port ....... status...... TxPkts........... RxPkts....... collisions

wan..........PPPoE.........117169............158739........0
lan ........10M/100M......2839..............0.............. 0
wlan .....11M/55M ......160232 ..........121602 .............0


Tx B/s ....................Rx B/s

wan 850 ...............7746
lan 50.................... 0
wlan 7862 ............904



Adsl link .............downstream.......... upstream
connection speed .......2656kbps .....448kbps
line attenuation ..........56db ...........15.5db
noise margin ............4db ................2db

i assume my half meg restriction is gone ?

espresso

laney85 wrote: »

i assume my half meg restriction is gone ?

Your half Mb restriction has now gone but you are still not likely to get much above 2Mb as it is currently syncing at 2656kbps with only 4db noise margin.

You did not answer the questions in post #26.

laney85

espresso wrote: »

Is your router plugged into the master socket? Your attenuation is quite high, are you some distance from your local exchange or could it be caused by internal wiring? Is there any LLU presence on your exchange?

only have 1 socket and there is a filter plugged in to it which my router and phone is in

llu not sure i think so SDSL:Yes LLU services:Yes Cable:Yes Wireless:No

over 2 miles from Exchange

not sure if my line supports any more speed than 2meg