Wireless router busted....unbusted

lambo28

mr_fishbulb wrote: »

See if you can follow this - http://sry-for-my-english.blogspot.com/2007/05/problems-with-d-link-di-524.html

Do you know how to hard-set your IP, subnet mask, etc for your network adaptor?

No, I don't know. Can you help me? Please

bigmacca81625

lambo28 wrote: »

So for the hard reset, do I keep the cables in.

for the hard reset you dont need anything other than the power adapter plugged in, but you need to hold the small reset button on the back for atleast 10 seconds, this should have restored the router to factory settings, if this doesnt work, then you need to replace it

espresso

lambo28 wrote: »

No, I don't know. Can you help me? Please

Did you run ipconfig with the router connected to the PC using the Ethernet cable?

What does it display for Default Gateway?

lambo28

It's not displaying anything

mr_fishbulb

lambo28 wrote: »

No, I don't know. Can you help me? Please

Keep the PC plugged into the router with the network cable.

Have a look at this page for how to hard-set the network details - http://www.home-network-help.com/set-ip.html

You will need to set -
IP address 192.168.123.253
subnet mask 255.255.255.0
default Gateway 192.168.123.254
DNS 192.168.123.254

Reboot your PC

Try running the firmware flashing utility again.

Cross your fingers

lambo28

mr_fishbulb wrote: »

Keep the PC plugged into the router with the network cable.

Have a look at this page for how to hard-set the network details - http://www.home-network-help.com/set-ip.html

You will need to set -
IP address 192.168.123.253
subnet mask 255.255.255.0
default Gateway 192.168.123.254
DNS 192.168.123.254

Reboot your PC

Try running the firmware flashing utility again.

Cross your fingers

I have two, which one shall i use:

Internet Protocol Version 6 (TCP/IPv 6)
Internet Protocol Version 4 (TCP/IPv 4)

espresso

lambo28 wrote: »

I have two, which one shall i use:

Internet Protocol Version 6 (TCP/IPv 6)
Internet Protocol Version 4 (TCP/IPv 4)

Use version 4 as the router may not be compatible with 6.

lambo28

Just restarting now.

bigmacca81625

hang on, can you get connection via the cable? because you've never stated otherwise?!

espresso

lambo28 wrote: »

Just restarting now.

The suspense is killing!

:rotfl: