Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Difference between 10/100mbps switch and 10/100/1000
Comments
-
How fast is the speed when attached to the router directly ? and how are you measuring the 35Mbps ?sparkiemalarkie wrote: »I bought the netgar switch and it worked brilliantly for about 3 weeks
http://www.amazon.co.uk/gp/product/B00AWM7PKO/?!!!!!ho01f-21
It's now reducing the speed from 35mbps to about 5mbps... is this to be expected?
Some of the 8 sockets work better than others ... might I have a faulty one?
sparkie4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed 5.07 + Octopus Intelligent Flux leccy
CEC Email energyclub@moneysavingexpert.com0 -
debitcardmayhem wrote: »How fast is the speed when attached to the router directly ? and how are you measuring the 35Mbps ?
Hi, I've measured the speed both wired and wireless with the Ookla speed test. When connected directly to the router, I get a nice flat diagram. Through the switch it's very 'dippy' and the overall speed drops right down to as low as 5mbps.
To start with it was great, but I found that some ports work better than others, and now it seems that the 'best' ports are now poor.
Is there such a thing as a factory reset?
sparkie0 -
pull the mains lead , leave to stew and plug back inSave a Rachael
buy a share in crapita0 -
pappa_golf wrote: »pull the mains lead , leave to stew and plug back in
Thanks I'll do that over night.
sparkie0 -
1 minute should do itSave a Rachael
buy a share in crapita0 -
Are you using cat 5/5e/6 from the router to the switch? or Homepigs ?sparkiemalarkie wrote: »Hi, I've measured the speed both wired and wireless with the Ookla speed test. When connected directly to the router, I get a nice flat diagram. Through the switch it's very 'dippy' and the overall speed drops right down to as low as 5mbps.
To start with it was great, but I found that some ports work better than others, and now it seems that the 'best' ports are now poor.
Is there such a thing as a factory reset?
sparkie4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed 5.07 + Octopus Intelligent Flux leccy
CEC Email energyclub@moneysavingexpert.com0 -
debitcardmayhem wrote: »Are you using cat 5/5e/6 from the router to the switch? or Homepigs ?
It's cable... not sure what standard but can get 35mbps without going through the switch
sparkie
It keeps losing connection...
I'm systematically moving the Ethernet leads from port to port to find the fastest / best / most stable connection ... I'm pretty sure I've got a duff one.0 -
Swap out your cables too if possible.
Im coming across dodgy cat5 all the time0 -
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 355.9K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.2K Spending & Discounts
- 248.4K Work, Benefits & Business
- 606.1K Mortgages, Homes & Bills
- 179.1K Life & Family
- 263.9K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards