We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Boiler Issue

2

Comments

  • philip548
    philip548 Posts: 13 Forumite
    edited 1 March 2014 at 1:48PM
    Yes the tap icon comes on the display
  • Lgas
    Lgas Posts: 365 Forumite
    Part of the Furniture 100 Posts Combo Breaker
    Do you get any hot water through at all? Does it go hot then cold or remain lukewarm, is it better when you run the tap slower?
  • philip548
    philip548 Posts: 13 Forumite
    I do get hot water but it starts to go cold and then hot.Also the heaters are getting hot when the hot tap is open.The temperature keeps fluctuating between hot and cold when the taps are open.The radiator pipe that comes out of the boiler gets hot but the pipe that carries the water to the taps isnt that hot which means that the hot water is diverting to both sides the rads and the taps.
  • ollski
    ollski Posts: 943 Forumite
    Probably worth checking that the hook on the spindle of the diverter valve is connected properly onto the motor. Does sound like a possible blockage but was the hot water ok before you changed the valve?
  • philip548
    philip548 Posts: 13 Forumite
    Yes the spindle on the valve is connected properly on the motor.the hot water was fine before getting the valve changed.
  • Lgas
    Lgas Posts: 365 Forumite
    Part of the Furniture 100 Posts Combo Breaker
    In that case I would definately question whether he fitted a new diverter valve or not.
  • philip548
    philip548 Posts: 13 Forumite
    edited 1 March 2014 at 4:34PM
    I can confirm he did because the leaking diverter valve was a bit different to the updated diverter valve.Vaillant changed the old diverter valve to a new updated one with a new part number.
  • philip548
    philip548 Posts: 13 Forumite
    I rang a friend who came round who seems to know a lot more about these things than me and he said the motor doesnt seem to be doing anything on the diverter valve.He says the pcb is most likely at fault which isnt sending anthing to the valve.He says the diverter valve is just buzzing and not opening or shutting.Had tried it on a another motor from a diverter valve and the motor was just buzzing not opening or shutting or moving at all.
  • philip548
    philip548 Posts: 13 Forumite
    If it does turn out to be the pcb which is most likely now how much would I expect to be paying for the pcb and getting it fitted?
  • RichardD1970
    RichardD1970 Posts: 3,796 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    Errrr then in!. In that case its nothing to do with you, its your landlords responsibility. So why on earth are you even thinking about paying for the repair.

    Get on to your landlord tomorrow and tell them to send someone to fix it.

    Surprised no one else has spotted this

    Think you may have miss read. ;)
    philip548 wrote: »
    Sorry it is gas,and the boiler is mine its not a rented accommodation.
    I will try the link you provided and see what happens.
    Everyone I have contacted comes back to say I cant have a new boiler because its classed as a high efficiency boiler.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351.7K Banking & Borrowing
  • 253.4K Reduce Debt & Boost Income
  • 454K Spending & Discounts
  • 244.7K Work, Benefits & Business
  • 600.1K Mortgages, Homes & Bills
  • 177.3K Life & Family
  • 258.3K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.2K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.