Wireless room thermostat advice please

diywhynot

mumin999 wrote: »

He advised that the benchmark had indeed been completed, it was in the back of the installation manual. I didn't see him do this and didn't tell me either. There is a bit about B. Regs Notification number - do I need this and how do I get it?

Thanks for your help and advice in this area.
Mumin

See here. Has the warranty been registered?

diywhynot

ollski wrote: »

Standing pressure means nothing, it will be dynamic pressure that was measured (working). Haven't installed for a while but Worcester's nominal pressure for operation was 0.2bar, I certainly wouldn't be worrying myself between 1.5 and the 1.6 for optimal performance.

We wouldn't be happy installing a 32 kW combi under the supply conditions shared by the OP. Surprising the number of installers who don't measure water flow/ dynamic pressure using a weir gauge and pressure test gauge or size the gas supply to met regs/boiler demands....too keen to fit a combi rather than installing what is the best solution for the site and the customer. Numerous examples on MSE.

ollski

It all sounds spot on, you should receive your building regs notice through the post in the next few weeks with your number on. Stop worrying about it and enjoy it!

CrazyM101

ollski wrote: »

It all sounds spot on, you should receive your building regs notice through the post in the next few weeks with your number on. Stop worrying about it and enjoy it!

Yes I'll try! He did mention that I'll get the warranty papers in the post soon and that he has also registered the boiler with Gas Safe so sounds like it's all legit.

Thanks
Mumin

jaybeetoo

mumin999 wrote: »

Yes I'll try! He did mention that I'll get the warranty papers in the post soon and that he has also registered the boiler with Gas Safe so sounds like it's all legit.

Thanks
Mumin

I had my boiler replaced in Feb. My Gas Safe certificate took a couple of weeks to arrive. Worcester told me they take about 6 weeks to send out the warranty.