We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

water softner help in chosing and is this true

Options
16970727475116

Comments

  • greatgimpo
    greatgimpo Posts: 1,256 Forumite
    A block salt softener will restrict where you get your salt from, thus eliminating competitive prices like I enjoy when buying sacks of tablets.
  • Doc_N
    Doc_N Posts: 8,543 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Photogenic
    greatgimpo wrote: »
    A block salt softener will restrict where you get your salt from, thus eliminating competitive prices like I enjoy when buying sacks of tablets.

    I'd go along with that.
  • Avoriaz
    Avoriaz Posts: 39,110 Forumite
    greatgimpo wrote: »
    A block salt softener will restrict where you get your salt from, thus eliminating competitive prices like I enjoy when buying sacks of tablets.
    You can use the cheaper tablets instead of blocks if you prefer price over convenience.

    That is what we did when we had a Kinetico Softener designed for blocks.
  • Hi all,

    I had a new Harveys Crown water softener installed and noticed that after a while (1 or 2 days) the water becomes hard again. Until I follow the manual regeneration procedure which then makes it send soft water down the pipes again.

    So the water softener seems to work but it seems to not know when to self regenerate. Does this sound like a defective product ? Maybe one of the tanks isn't working? Could there be an issue with the way it was plumbed in?
  • Chunks
    Chunks Posts: 712 Forumite
    Part of the Furniture 500 Posts Combo Breaker
    If the manual regen works, restoring the softened water supply, I would tend to rule out the connections. These units should look after themselves so I would be on the phone to your supplier/manufacturer; probably something related to the internal workings.

    good luck.
  • I need to install a water softener in household of one....bamboozled by salesmen on what is best. Can anyone give good advice please....is tapworks AD11 made by Harvey's? So far shown The Hague, Harvey's minimax, Kenetico 2020....all very pricey. Help please...
  • I've got Kinetico coming out tomorrow to advise what we need/hard sell. Your figure will give me an idea on what is an acceptable price. £200 installation seems a lot considering we want to put it under the kitchen sink and that's where mains comes in or am I being naive?
    Disappointed about Twintec price as that was compatible with either plumbing system. With Kinetico, they seem to have a machine for each type.

    Thanks Moonrakerz but I'm definately homing in on non-electric.

    Advice I've just received is Twintec is a single chamber where Kenetic and Harvey's MiniMax are twin chamber: all take block salt.
    Has anyone heard of ScaleMaster water softeners and if so, are they pleased with them. Price-wise, a considerable saving on the big names and seem to do the same job.
  • WendellG wrote: »
    In the end I narrowed it down to a choice between the Scalemaster softline 150 and the Plumbsoft Solo. I went for the Scalemaster as it's lot cheaper and single cylinder. I don't recall it being mentioned in this thread but the boiler differences just change the fitting types - the actual softener is the same.

    Getting it fitted on Wed, the plumber quoted £150-£180 depending on how trick the connections to the existing pipes are.
    Are you pleased with the Scalemaster softener…almost a year on? I'm interested as your criteria seem similar to mine. Did you buy through supplier or through plumber? Would really appreciate your comments. Thanks
  • BoxerfanUK
    BoxerfanUK Posts: 727 Forumite
    Part of the Furniture 500 Posts Photogenic
    Savernake wrote: »
    Advice I've just received is Twintec is a single chamber where Kenetic and Harvey's MiniMax are twin chamber: all take block salt.
    Has anyone heard of ScaleMaster water softeners and if so, are they pleased with them. Price-wise, a considerable saving on the big names and seem to do the same job.
    Twintec is also a TWIN cylinder machine, I know as I have one


    http://www.twintec.com/?gclid=CKap7ejj4rsCFZPItAodWBIA4g


    If you want a Harveys type twin cylinder model without having to pay rip off dealer prices check these out;


    http://www.ebay.co.uk/itm/Crown-Twin-Tank-Non-Electric-Block-Salt-Water-Softener-Unlimited-Soft-Water-/191015845639?pt=UK_H_G_Major_Appliances_Oven_Cooker_Hoods_ET&hash=item2c796e7f07
  • greatgimpo wrote: »
    A block salt softener will restrict where you get your salt from, thus eliminating competitive prices like I enjoy when buying sacks of tablets.

    So there isn't any difference in the two in terms of performance or otherwise - just that it narrows the type of salt you can use?
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 350.9K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.5K Spending & Discounts
  • 243.9K Work, Benefits & Business
  • 598.8K Mortgages, Homes & Bills
  • 176.9K Life & Family
  • 257.2K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.