We'd like to remind Forumites to please avoid political debate on the Forum... Read More »
We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Laptops suddenly cant see/connect to our home wireless network but can see nieghbours
Options
Comments
-
The old laptop should also work as is too, assuming it has wireless already. The N wireless gives faster Wireless speeds but you are on 10Mbps internet so no real need to change the old laptop assuming it is Wireless G (54mbps) The Vaio if it is draft N will work at up to 54mbps with existing router and up to 200Mbps with the Virgin N routers but you won't notice much difference except a longer range perhaps, and that will mean that the speed will drop the further away from the router you are.4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed dec 24 @ 5.74 tracker again+ Octopus Intelligent Flux leccy0
-
Found out that the cable wireless routers with virgin media are only for adsl and mine is through cable so it will have to be a separate router anyway.
Got in with the admin way but there is just about no info there I have always had this problem its blanked out everything, I posted about it some time ago. I will have to get the router disc out to find out anything. Is it worth re doing the router from scratch?Thanx
Lady_K0 -
Found out that the cable wireless routers with virgin media are only for adsl and mine is through cable so it will have to be a separate router anyway.
Got in with the admin way but there is just about no info there I have always had this problem its blanked out everything, I posted about it some time ago. I will have to get the router disc out to find out anything. Is it worth re doing the router from scratch?
It is probably blanked out on the Setup - Basic Settings tab , beside that where it says Setup It should say Wireless click that and it should show you the Basic Wireless Settings, which is what I was talking about with the earlier post. Make sure that the mode is G or Mixed, and SSID Broadcast is enabled.4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed dec 24 @ 5.74 tracker again+ Octopus Intelligent Flux leccy0 -
It says
Mixed
Wireless Channel 6-2437ghz
ssid enabled
Is ssid the name I would see in the list of available connections? Its just I put the disc in and not sure if I have got the name set in the right boxThanx
Lady_K0 -
Found out that the cable wireless routers with virgin media are only for adsl and mine is through cable so it will have to be a separate router anyway.4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed dec 24 @ 5.74 tracker again+ Octopus Intelligent Flux leccy0
-
It says
Mixed
Wireless Channel 6-2437ghz
ssid enabled
Is ssid the name I would see in the list of available connections? Its just I put the disc in and not sure if I have got the name set in the right box
Yes it probably says WRT54G or some such. But whatever it is set to you should see that in you list of available networks.4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed dec 24 @ 5.74 tracker again+ Octopus Intelligent Flux leccy0 -
I might be getting somewhere but its not right yet, I can now see the network in the list of connections but it has a red crass at the side of it. If I right click connect is blanked out but I accessed properties and input the password but it is not connecting. I have probably gone some of the settings wrong somehow as I did put the disc in to set it up again and couldnt remember what was in before so just guessed. It does say signal strength excellent but the red cross is still there.Thanx
Lady_K0 -
just checked in the linksys settings I have it on
wpa2 personal
tkip+aes
group key renewal 3600
I do have a 64 bit phassphase if that makes any difference and before it used to say wpa2 at the side in the network list but when I hover overe it now it says wpa psk 802 11gThanx
Lady_K0 -
I might be getting somewhere but its not right yet, I can now see the network in the list of connections but it has a red crass at the side of it. If I right click connect is blanked out but I accessed properties and input the password but it is not connecting. I have probably gone some of the settings wrong somehow as I did put the disc in to set it up again and couldnt remember what was in before so just guessed. It does say signal strength excellent but the red cross is still there.4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed dec 24 @ 5.74 tracker again+ Octopus Intelligent Flux leccy0
-
We cross posted there.4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed dec 24 @ 5.74 tracker again+ Octopus Intelligent Flux leccy0
This discussion has been closed.
Confirm your email address to Create Threads and Reply

Categories
- All Categories
- 351K Banking & Borrowing
- 253.1K Reduce Debt & Boost Income
- 453.6K Spending & Discounts
- 244K Work, Benefits & Business
- 599K Mortgages, Homes & Bills
- 176.9K Life & Family
- 257.4K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 37.6K Read-Only Boards