📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Kitchen Floor Tiling

Options
Anyone advise on this? I thought it was expensive at £51/m[FONT=&quot]²[/FONT] but I'm not sure since it does include materials; this is the quote:

[FONT=&quot]"To:[/FONT]
[FONT=&quot] [/FONT]
[FONT=&quot]Prepare kitchen floor ready to accept floor tiles[/FONT]
[FONT=&quot]Fit approx 18M² client supplied floor tiles[/FONT]
[FONT=&quot]Grout tiles[/FONT]
[FONT=&quot] [/FONT]
[FONT=&quot]To supply:[/FONT]
[FONT=&quot] [/FONT]
[FONT=&quot]Floor tile adhesive[/FONT]
[FONT=&quot]Floor tile grout[/FONT]
[FONT=&quot]Floor sealant(seal old adhesives to floor)[/FONT]
[FONT=&quot] [/FONT]
[FONT=&quot]NET TOTAL including labour and supplied materials[/FONT]
[FONT=&quot]£800.00[/FONT]
[FONT=&quot]VAT(@15%)[/FONT]
[FONT=&quot]£120.00[/FONT]
[FONT=&quot]GROSSTOTAL[/FONT]
[FONT=&quot]£920.00"[/FONT]


Also is it a good idea to "seal old adhesives to floor"? I thought it would have been better to strip the floor back completely to the concrete or does it not really matter? At the moment there are old old grey vinyl things stuck to the floor that I think were put down when the house was either first built or very new when it was owned by the local council.



[FONT=&quot][/FONT]
«1

Comments

  • andyhop
    andyhop Posts: 1,996 Forumite
    Part of the Furniture 1,000 Posts Combo Breaker
    sounds way too much unless its natural stones.

    Is there a lot of cuts?Can the plinths and end panels be removed?
    Hi, we’ve had to remove your signature. If you’re not sure why please read the forum rules or email the forum team if you’re still unsure
  • KellyWelly
    KellyWelly Posts: 420 Forumite
    I won't be buying natural stone, I'm going for ceramic and yes, all the plinths can be removed and I only have one end panel that could be removed if he unscrewed it. I'll get some more quotes in, we're having the work done in August. The bloke who quoted was the same one who had done my bathroom which I think he vastly underestimated and he's either looking to recoup his losses from that or he is hedging his bets with this job.
  • Rosebery_2
    Rosebery_2 Posts: 154 Forumite
    On the face of it I'd say it looks out by a factor of 2.

    Cheers
  • emmas42
    emmas42 Posts: 86 Forumite
    edited 21 July 2009 at 6:08PM
    It is easier to leave the old tiles down and tile on top of them as the adhesive underneath them will need to re removed altogether which is a really nasty longwinded job. By sealant they may mean unibond or simelar

    It does seem about double the going rate.
  • andyhop
    andyhop Posts: 1,996 Forumite
    Part of the Furniture 1,000 Posts Combo Breaker
    You are always better removing the old tiles

    If the floor after removal is in poor condition then it needs a simple self levelling screed

    I would never advise tile on tile as you do not know what the previous fixers work was like, It could have been laided poorly or even dot and dabbed
    Hi, we’ve had to remove your signature. If you’re not sure why please read the forum rules or email the forum team if you’re still unsure
  • Rosebery_2
    Rosebery_2 Posts: 154 Forumite
    emmas42 wrote: »
    It is easier to leave the old tiles down and tile on top of them as the adhesive underneath them will need to re removed altogether which is a really nasty longwinded job.
    But that would be a bodge. Perhaps thats why the price looks high - to cover this labour and time intensive work?

    By sealant they may mean unibond or simelar
    As you work in a tile shop I really do hope you don't mean that.

    It does seem about double the going rate, I work in a tile shop and we would expect our customers to be charged between £20-£30 a square metre for ceramics or porcelain, maybe a little more for Natural stone.
    Exactly.

    Cheers
  • emmas42
    emmas42 Posts: 86 Forumite
    Rosebery wrote: »
    But that would be a bodge. Perhaps thats why the price looks high - to cover this labour and time intensive work?


    As you work in a tile shop I really do hope you don't mean that.


    Exactly.

    Cheers

    What I meant was that a hell of a lot of tilers just seem to think that a coat of unibond will fix everything! An awful lot refuse to be told otherwise. (Especially when I try to advise, being a young woman I couldn'y possibly know! :eek:)
    The tiles which cause problems and are best left alone are the old marley tiles that always seemed to be stuck into council properties built in the 60's. When you rip them up you are faced with nasty black or brown adhesive that is a massive job in itself, I've even had customers use Petrol to get this up :D (I certainly did NOT tell them to do that!)
    If you decide to take up Marley tiles then at least 80% of the sticky yuck stuff has to be taken up too before you can even think about tiling. popping levelling compound over the top isn't very effective as it doesn't key to the adhesive either.
  • thechippy
    thechippy Posts: 1,938 Forumite
    If it's the old vinyl tiles, I'd leave them down if they are well stuck. There is nothing wrong with using some self levelling on any poor areas. If a good quality flexible adhesive is used, it will adhere fine.
    Happiness, is a Kebab called Doner.....:heart2::heart2:
  • mojomcl
    mojomcl Posts: 48 Forumite
    edited 18 June 2009 at 9:11PM
    Does your kitchen really have 18M² of floor space?! OMG! Surely not?
    If it does, then I'd snap the £920 quote up before he notices his mis-calculation.....I thought you meant 18SqM, and I bet he does too ;-)
  • Atelier
    Atelier Posts: 164 Forumite
    This is a standard tiling quote (although quite an expensive one).

    The price is for all the costs associated with fitting a new floor but does not include the tiles. Therefore £51/sqM is completely over the top.

    Round here, the rules of thumb is to pay £15/sqM including materials for a flooring professional. Our kitchen is 30sqM and we paid £160 labour (1 day for 2 people) + approximately £150 materials which I bought from the local tiling centre.
    KellyWelly wrote: »
    Anyone advise on this? I thought it was expensive at £51/m[FONT=&quot]²[/FONT] but I'm not sure since it does include materials; this is the quote:

    [FONT=&quot]"To:[/FONT]

    [FONT=&quot]Prepare kitchen floor ready to accept floor tiles[/FONT]
    [FONT=&quot]Fit approx 18M² client supplied floor tiles[/FONT]
    [FONT=&quot]Grout tiles[/FONT]

    [FONT=&quot]To supply:[/FONT]

    [FONT=&quot]Floor tile adhesive[/FONT]
    [FONT=&quot]Floor tile grout[/FONT]
    [FONT=&quot]Floor sealant(seal old adhesives to floor)[/FONT]

    [FONT=&quot]NET TOTAL including labour and supplied materials[/FONT]
    [FONT=&quot]£800.00[/FONT]
    [FONT=&quot]VAT(@15%)[/FONT]
    [FONT=&quot]£120.00[/FONT]
    [FONT=&quot]GROSSTOTAL[/FONT]
    [FONT=&quot]£920.00"[/FONT]


    Also is it a good idea to "seal old adhesives to floor"? I thought it would have been better to strip the floor back completely to the concrete or does it not really matter? At the moment there are old old grey vinyl things stuck to the floor that I think were put down when the house was either first built or very new when it was owned by the local council.


This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351.1K Banking & Borrowing
  • 253.2K Reduce Debt & Boost Income
  • 453.7K Spending & Discounts
  • 244.1K Work, Benefits & Business
  • 599.2K Mortgages, Homes & Bills
  • 177K Life & Family
  • 257.5K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.