We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Gas Cooker

Options
2»

Comments

  • flang
    flang Posts: 1,094 Forumite
    Never had a problem with using washing up liquid, but sure proper leak detection fluid should really be used :D:D:D
    I like the cheap skate way though :d
  • Hi robodan,

    Good luck mate,

    Sorry for late reply, been away!
  • well we fitted it last night & all went well, we had to disconnect the hose from the old cooker at the cooker and connect it at the new, cos we didn't have a bayonet connection at the mains!!!

    But there was no leaks all went well
  • flang
    flang Posts: 1,094 Forumite
    Excellent stuff :D:D
    You saved yourself a nice tidy sum! ;)
  • polybear
    polybear Posts: 398 Forumite
    Part of the Furniture 100 Posts Combo Breaker
    A tip for anyone thinking of buying a new Gas Cooker - they almost always come WITHOUT a hose fitted. So take the existing hose (making sure it's in good condition) off your old cooker before throwing it away, and fit it to the new cooker. Go to a decent plumbing & heating shop and get some pipe sealant compound that is suitable for gas connections, and use it in conjunction with PTFE tape. Always check for leaks afterwards using proper leak detector spray. And make sure that the O-ring on the bayonet connector is in good condition. If you don't understand any of the above then you should leave the job to someone who does. Of course, all this is purely hypothetical, since working on Gas installations is illegal unless you are CORGI registered. If this means that you need a Gas Engineer to unplug/reconnect a cooker from a bayonet connection when you want to pull it out to clean etc. I'm not sure.....
  • That's not quite true polybear - Anybody can work on gas fittings in their own house as a DIY'er - However knowledge of the Gas Installation and Use Regulations is essential as you must be "competant" to do so as defined by the regulations.

    This competancy can be determined by the user; so if a gas consumer deems themself as a competant individual; has done the research and done the job in accordance with the regs above then they are complying with the law... You only need to be CORGI registered when undertaking work in a premesis that is not your own (Ie; when being employed by someone else)....




    However.... Sting in the tail here.... Do it yourself and leave a gas leak or dangerous situation and you could end up seriously injurred or placed in jail - So play caution to the wind and read up on the process first.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 350.9K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.5K Spending & Discounts
  • 243.9K Work, Benefits & Business
  • 598.8K Mortgages, Homes & Bills
  • 176.9K Life & Family
  • 257.2K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.