Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
We’d like to remind Forumites to please avoid political debate on the Forum.
This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Smart Water Meter Fitted
Smart water meter fitted recently, down a hole on the roadside rural verge replacing the old dumb “kent” meter. The meter at the bottom must use either Bluetooth or Zigbee protocol to communicate with the communications module which is screwed to the underside of the top cover. This communicates via the mobile phone network to the Water Company’s HQ. The installer checked the signal was OK prior. I’ll be guessing that the link between the two units is set up as a pre-paired non discoverable encrypted channel.
I have a photo of the old meter showing its final reading. I await to see how long before the new meter is activated on my account.
After that it will be a case of:
1. Does it actually work, and how often is it sending readings and can I monitor it on my Water company’s portal, and how much is it delayed between reading and being displayed.
2. How long do the batteries in the sender and communications module units last.
3 The hole fills always with water ‘cos the sealing rings in the meter top covers have long since perished and the drain holes at the bottom of the Atplas boundary box are clearly insufficient/get clogged. At that point does the meter to comms unit link, now underwater, and around 0.6m away from each other still work.
Watch this space…..
Comments
-
Good call to do a meter reading 🙈
Oh, looks like they've just done an actual read on nov 16, saved me the hassle 😅
I'm FTB, not an expert, all my comments are from personal experience and not a professional advice.Mortgage debt start date 11/2024 = 175k (5.19%)... Q1/2026 = PAID (3.94%)0 -
Anglian left us a card with final meter read and a leaflet about the new smart beast.
Meter (underwater lots of the time) transmits to the box screwed to the lid just fine… In fact I read on this or a n other forum that one can take the lid and module many 10s of metres from the meter and it still communicates fine (though the suppliers say only 2 metres). Meter sends reads hourly to the comms box which stores them and every 6 hours sends them to supplier by UHF radio (Arqiva 470 MHz approx).
Hourly reads are stored on the AW system and can be seen via the web or app. The latest for me are from yesterday. So not 'live'. Zero use is recorded much of the time and it records 1 litre of use (i.e. 3 places of decimal after the Cubic Metre number used for billing).
Ours took a couple of weeks to 'go live' on the AW portal.
They use long life lithium batteries and have an expected life in excess of 10 years due to the low power intermittent usage pattern. They get renewed on a meter swap out basis, AIUI.
1 -
That's all very interesting but are the readings accurate ? They will probably say they are, but we never really know do we ? Trust in water companies evaporated a long time ago.
0 -
Trust in water companies evaporated a long time ago.
Heh.
0
Categories
- All Categories
- 356K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.3K Spending & Discounts
- 248.5K Work, Benefits & Business
- 606.2K Mortgages, Homes & Bills
- 179.1K Life & Family
- 264K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards


