Changing a window orientation

Section62

https://forums.moneysavingexpert.com/discussion/comment/82177832#Comment_82177832

Would a top hung hinge set up take the weight of the old side hung window?

If the window is wood then yes. If uPVC then the hinges would need to be swapped for top hung ones anyway.

If changing the hinges and window orientation would they need to be compliant to building regs or fire safety or something?

OP says 1 or 2 foot of glass, is that the double glazed unit or the size of the opener that needs changing?

The minimum unobstructed opening for an escape window has to be 0.33m2, minimum width and minimum height of 450mm. If one dimension of the window is 300mm (whether the structural opening, window opening, or glass size) then it won't comply with the regs for being a means of escape.

You're right about a lack of a photo meaning we are all guessing - but as well as not being able to say for sure it can, it does also mean we can't rule out the possibility the orientation can be changed.

OP seems happy with the responses, and is doing the obvious next step… asking a window company whether they can do it. The window company may say 'no' even if it is possible, because for them it is probably easier (and more profitable) to just fit a replacement window.

[Deleted User]

it’s upvc, I’m happy to have the actual window replaced; it’s the frame that fits into the wall that I don’t want replaced because it would cause too much upheaval to my inside and outside decor, I’d rather leave the window as it is than have to have that fixed.
I didn’t say a photo isn’t relevant. But as I’m going to phone the window company anyway, it doesn’t matter.
I just thought someone might have been able to say yes or no; however as I got both yes and no, I’ll ask the window company 😁

FreeBear

Frame and (opening) window is usually supplied as a matched pair. The hinges and handles/locks being fitted at the factory where it is easier to make adjustments. Whilst it may be possible to get the window made without a frame, I doubt you would save much money.

[Deleted User]

https://forums.moneysavingexpert.com/discussion/comment/82179318#Comment_82179318

not concerned so much with the money as the upheaval if the whole frame has to be changed

WIAWSNB

And are you ok with old handle holes being filled, and partially visible?

Anyhoo, curious - you haven't told us what's behind this decision?!

Boohoo

https://forums.moneysavingexpert.com/discussion/comment/82179678#Comment_82179678

"as no one agrees I shall ask the window firm. It’s a first floor bathroom window, why I want it top hung rather than side hung isn’t relevant; thanks for all your input but I’ll ask the window company."

Copy and pasted what the OP said.

WIAWSNB

Thanks.

For what it's worth, I have a currently-unglazed window opening section here, ready for fitting into its frame next year. As far as I can see, the frame profile is of a single style all around, so hinges handles and locks can be installed wherever.

[Deleted User]

https://forums.moneysavingexpert.com/discussion/comment/82179678#Comment_82179678

I don’t mind, but happy to have a new window, it’s just the main frame that the window fits in that I don’t want removed because of the damage.

Jeez, I just think it’ll be less draughty in the shower if you must know. Nothing sinister 😂

WIAWSNB

Now that I didn't expect ☺️

[Deleted User]

well the window company say no, so that’s that - unless I can find a handyman who is willing to have a go. I can’t imagine it’s impossible to be honest 🤔