Hildebrand Glow Display and CAD

squirrelpie

https://forums.moneysavingexpert.com/discussion/comment/81915389#Comment_81915389

Sorry, you're right that zigbee can use 2.4 GHz as well, though it usually uses different channels than wi-fi and only a narrow bandwidth so there's not usually a problem. But you said that your home mini couldn't connect to the comms hub, which uses a zigbee connection not a wi-fi one. And there's absolutely nothing wrong with using the same SSID for 2.4 GHz and 5 GHz wi-fi. In fact it is recommended to enable devices to choose the best signal automatically.

Chrysalis

https://forums.moneysavingexpert.com/discussion/comment/81914588#Comment_81914588

Thanks, whats happening is it goes off if I turn off the screen with power button, but I might walk by it 10 minutes later and LED is back on, its a shame they couldnt implement a simple setting for it. If they had to make a FAQ page for it, then that indicates there is enough warrant to make a very simple coding change. I do have some LED blackout tape somewhere its shaped in small strips for things like this, knowing me I have probably lost it though.

squirrelpie

https://forums.moneysavingexpert.com/discussion/comment/81933397#Comment_81933397

You could email them and suggest making that change. They seem to be fairly responsive. And yes, I've used electrical tape to cover LEDs before now 😯