Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
How to connect three units
Comments
-
Do you have any speaker cable at the moment? Does it have some type of plug on it? If so, can you describe them or post a picture of them, or tell us where on the internet you can see a picture of them?
Can you connect any existing cable to the speakers, and have you done so?
There's a big panel in the middle of the rear of the Yamaha, with white lines around the terminals, with SPEAKERS in white letters. You should be connecting your pair of speakers to the A - Main terminals.
One pair, red & black for Left, the other pair, red & black for right.
(Ignore the red circle, that's from someone else's discussion)
0 -
Confused, you only moved the furniture, what did you do with the cables?laserbeam said:The main.problem seems to be connecting the speakers to the Amp as there is nowhere to plug in any leads.It seems you either have to get some speaker wire and connect it to the Amp and there is nowhere near me which sells that.Would have to order some from Amazon.Where would I connect the Speaker wire to on the Amp.Thanks for all the replies much appreciated.4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed 5.07 + Octopus Intelligent Flux leccy
CEC Email energyclub@moneysavingexpert.com0 -
debitcardmayhem said:Confused, you only moved the furniture, what did you do with the cables?
I have the same problem in my household. Missus decided to move things around and speaker doesn't work. "I didn't touch the cables" Yeah right, then how come one isn't connected to anything after the move! Sorry, not any help but the rant makes me feel better.
2 -
No problem, of course i always suggest take a photo before you start and compare with the end result , especially when changing hardware.TELLIT01 said:debitcardmayhem said:Confused, you only moved the furniture, what did you do with the cables?
I have the same problem in my household. Missus decided to move things around and speaker doesn't work. "I didn't touch the cables" Yeah right, then how come one isn't connected to anything after the move! Sorry, not any help but the rant makes me feel better.4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed 5.07 + Octopus Intelligent Flux leccy
CEC Email energyclub@moneysavingexpert.com0 -
I have now got some new speaker cable now just need to connect them to the Amp I know where they are supposed to go but there is no way of attaching them to the connections as there are no holes and cannot see any way of attaching them..debitcardmayhem said:
Confused, you only moved the furniture, what did you do with the cables?laserbeam said:The main.problem seems to be connecting the speakers to the Amp as there is nowhere to plug in any leads.It seems you either have to get some speaker wire and connect it to the Amp and there is nowhere near me which sells that.Would have to order some from Amazon.Where would I connect the Speaker wire to on the Amp.Thanks for all the replies much appreciated.0 -
Forgot to say the speakers have to be connected to the speaker terminals in speaker A.See post one on this page but how are they connected0
-
-
That will not work first of all there are no holes in the terminals and also the screw cap's do not screw offflaneurs_lobster said:0 -
Yes there should be , and the caps don't fully twist off https://usa.yamaha.com/products/contents/audio_visual/downloads/manuals/index.html?l=en&c=audio_visual&k=htr-5830 look at page 16laserbeam said:
That will not work first of all there are no holes in the terminals and also the screw cap's do not screw offflaneurs_lobster said:
4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed 5.07 + Octopus Intelligent Flux leccy
CEC Email energyclub@moneysavingexpert.com0 -
Yes there should be , and the caps don't fully twist off https://usa.yamaha.com/products/contents/audio_visual/downloads/manuals/index.html?l=en&c=audio_visual&k=htr-5830 look at page 16laserbeam said:
That will not work first of all there are no holes in the terminals and also the screw cap's do not screw offflaneurs_lobster said:
4.8kWp 12x400W Longhi 9.6 kWh battery Giv-hy 5.0 Inverter, WSW facing Essex . Aint no sunshine ☀️ Octopus gas fixed 5.07 + Octopus Intelligent Flux leccy
CEC Email energyclub@moneysavingexpert.com0
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 355.9K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.2K Spending & Discounts
- 248.4K Work, Benefits & Business
- 606.1K Mortgages, Homes & Bills
- 179K Life & Family
- 263.9K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards

