Cant find a 300 Depth Base Unit?

TELLIT01

grumbler said:

Even wall units are usually about 40cm deep.

I think you'll have to DIY - cut a deeper unit or play with shelf units and doors.

Standard wall units are 30cm, possibly slightly more with the door fitted.

FreeBear

TELLIT01 said:

grumbler said:

Even wall units are usually about 40cm deep.

I think you'll have to DIY - cut a deeper unit or play with shelf units and doors.

Standard wall units are 30cm, possibly slightly more with the door fitted.

I had measured the two wall units I have here - Basic Cooke & Lewis from B&Q - 340mm deep including a ~20mm service void. Have used one as a base unit, but holes need to be drilled in the right spot for legs (simple enough task) unless you cut the spigots off the plastic legs.

grumbler

TELLIT01 said:

grumbler said:

Even wall units are usually about 40cm deep.

I think you'll have to DIY - cut a deeper unit or play with shelf units and doors.

Standard wall units are 30cm, possibly slightly more with the door fitted.

Well, I checked Ikea where it's 38.8

JIL

FreeBear said:

Okydoky25 said: Help please. I have had a little utility room built off my kitchen and I am looking for a 300 depth x 1000 width Base unit cupboard but I cant seem to find one anywhere? 

https://www.diy-kitchens.com/kitchen-units/base/slimline/ - First place I looked...

I have these in my utility room, no handles on the doors, the work surface just over the top of the door.  Do the job beautifully, I was able to run a row of units in a very slim space. 

frankersBri

DIY Kitchens do loads of reduced depth base units. This one is 1000 wide, 300 deep. Just a standard cupboard. But they also have ones with drawers too, and loads of different door styles 
https://www.diy-kitchens.com/kitchen-units/base/slimline/1000mm-1000mm-slimline-highline-base-unit-(300mm-deep)/wp11589/#.YJcRVxjTUwA