We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Lux ac battery controller

Options
1…5758606263…202

Comments

  • mickyduck55
    mickyduck55 Posts: 676 Forumite
    Fifth Anniversary 500 Posts Name Dropper
    EVandPV said:
    Just been getting this all day. No problems with any other sites.
    Although app working fine, strangely. 🤔


    My VPN sometimes does this but if I exit the VPN then logon, reactivate VPN it seems fine....
    3.995kWP SSW facing. Commissioned 7 July 2011. 24 degree pitch (£3.36 /W).
    17 Yingli 235 panels
    Sunnyboy 4000TL inverter
    Sunny Webox
    Solar Immersion installed May 2013, after two Solar Immersion lasting just over the guarantee period replaced with Solic 200... no problems since.

    13 Feb 2020 LUX AC 3600 and 3 X Pylon Tech 3.5 kW batteries added...

    20 January 2024 Daikin ASHP installed
  • EVandPV
    EVandPV Posts: 2,112 Forumite
    Fifth Anniversary 1,000 Posts Name Dropper
    edited 15 July 2021 at 6:30PM
    Definitely the router that's started blocking it, maybe something to do with it being a server in China ??
    Can get on the portal with my tablet using my phone as a 4g hotspot.

    Edit: App not working on Sky broadband now either.


    Scott in Fife, 2.9kwp pv SSW facing, 2.7kw Fronius inverter installed Jan 2012 - 14.3kwh Seplos Mason battery storage with Lux ac controller - Renault Zoe 40kwh, Corsa-e 50kwh, Zappi EV charger and Octopus Go
  • EVandPV
    EVandPV Posts: 2,112 Forumite
    Fifth Anniversary 1,000 Posts Name Dropper
    edited 15 July 2021 at 6:59PM
    mickyduck55 said:
    EVandPV said:
    Just been getting this all day. No problems with any other sites.
    Although app working fine, strangely. 🤔


    My VPN sometimes does this but if I exit the VPN then logon, reactivate VPN it seems fine....
    Installed a VPN and can get on the portal again via Sky broadband. 
    Wonder if Sky have now started blocking some Chinese sites ??
    Scott in Fife, 2.9kwp pv SSW facing, 2.7kw Fronius inverter installed Jan 2012 - 14.3kwh Seplos Mason battery storage with Lux ac controller - Renault Zoe 40kwh, Corsa-e 50kwh, Zappi EV charger and Octopus Go
  • EVandPV
    EVandPV Posts: 2,112 Forumite
    Fifth Anniversary 1,000 Posts Name Dropper
    Was about to ask this on the Navitron forum but it seems it's toast now .....

    http://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17077&page=1
    Scott in Fife, 2.9kwp pv SSW facing, 2.7kw Fronius inverter installed Jan 2012 - 14.3kwh Seplos Mason battery storage with Lux ac controller - Renault Zoe 40kwh, Corsa-e 50kwh, Zappi EV charger and Octopus Go
  • QrizB
    QrizB Posts: 18,142 Forumite
    10,000 Posts Fourth Anniversary Photogenic Name Dropper
    EVandPV said:
    Was about to ask this on the Navitron forum but it seems it's toast now .....
    Well that's a shame :(
    N. Hampshire, he/him. Octopus Intelligent Go elec & Tracker gas / Vodafone BB / iD mobile. Ripple Kirk Hill member.
    2.72kWp PV facing SSW installed Jan 2012. 11 x 247w panels, 3.6kw inverter. 34 MWh generated, long-term average 2.6 Os.
    Not exactly back from my break, but dipping in and out of the forum.
    Ofgem cap table, Ofgem cap explainer. Economy 7 cap explainer. Gas vs E7 vs peak elec heating costs, Best kettle!
  • EVandPV
    EVandPV Posts: 2,112 Forumite
    Fifth Anniversary 1,000 Posts Name Dropper
    Well whatever the issue was, I'm getting back on the portal today. 
    Strange !
    Scott in Fife, 2.9kwp pv SSW facing, 2.7kw Fronius inverter installed Jan 2012 - 14.3kwh Seplos Mason battery storage with Lux ac controller - Renault Zoe 40kwh, Corsa-e 50kwh, Zappi EV charger and Octopus Go
  • EVandPV
    EVandPV Posts: 2,112 Forumite
    Fifth Anniversary 1,000 Posts Name Dropper
    Does anyone know how to get the SOH of each individual module in a stack of Pylontechs either with the batteryview app or what command to send with a terminal app ?

    I know the command pwrsys gets you the SOH of the whole stack but I can't seem to find how to check each module.
    Scott in Fife, 2.9kwp pv SSW facing, 2.7kw Fronius inverter installed Jan 2012 - 14.3kwh Seplos Mason battery storage with Lux ac controller - Renault Zoe 40kwh, Corsa-e 50kwh, Zappi EV charger and Octopus Go
  • Solarchaser
    Solarchaser Posts: 1,758 Forumite
    Sixth Anniversary 1,000 Posts Name Dropper
    "This will give you the system SOH in percentage.

    At the console screen type the command:

    login debug

    this will change the prompt from Pylon> to Pylon debug>

    now type the command pwrsys

    System RC = System Remaining Capacity
    System FCC System Fully Charged Capacity
    System SOC = System State of Charge
    System SOH = System State of Health"

    This was an email I got from the lad selling the cables on ebay, though I think I had to plug it into each one individually Scott.
    I was sure I'd done a post about this, but I've been searching a while and can't see anything 
    West central Scotland
    4kw sse since 2014 and 6.6kw wsw / ene split since 2019
    24kwh leaf, 75Kwh Tesla and Lux 3600 with 60Kwh storage
  • EVandPV
    EVandPV Posts: 2,112 Forumite
    Fifth Anniversary 1,000 Posts Name Dropper
    Solarchaser said:
    "This will give you the system SOH in percentage.

    At the console screen type the command:

    login debug

    this will change the prompt from Pylon> to Pylon debug>

    now type the command pwrsys

    System RC = System Remaining Capacity
    System FCC System Fully Charged Capacity
    System SOC = System State of Charge
    System SOH = System State of Health"

    This was an email I got from the lad selling the cables on ebay, though I think I had to plug it into each one individually Scott.
    I was sure I'd done a post about this, but I've been searching a while and can't see anything 
    Cheers SC. 
    Yeah you would need to disconnect each module and plug the serial cable into each one with pwrsys.
    One of the ebay listings suggested that you should be able to get the SOH for each module with doing that though but I'm damned if I can figure it out !!??
    Scott in Fife, 2.9kwp pv SSW facing, 2.7kw Fronius inverter installed Jan 2012 - 14.3kwh Seplos Mason battery storage with Lux ac controller - Renault Zoe 40kwh, Corsa-e 50kwh, Zappi EV charger and Octopus Go
  • EVandPV
    EVandPV Posts: 2,112 Forumite
    Fifth Anniversary 1,000 Posts Name Dropper
    Is it just me again or is the portal down tonight ?


    Scott in Fife, 2.9kwp pv SSW facing, 2.7kw Fronius inverter installed Jan 2012 - 14.3kwh Seplos Mason battery storage with Lux ac controller - Renault Zoe 40kwh, Corsa-e 50kwh, Zappi EV charger and Octopus Go
★ ★ ★ Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 350.9K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.5K Spending & Discounts
  • 243.9K Work, Benefits & Business
  • 598.7K Mortgages, Homes & Bills
  • 176.9K Life & Family
  • 257.2K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.
Update Your Picture