Kitchen advice

NealPhillips

Kindly have a look at Probox Drawers website. You'll find the drawer which you want to.

Jonah01

Luke1066 wrote: »

In which case do as I said before and make the opening 600 for the W/M.

Sorry I don't understand this bit.

The door for this is 600mm is that what you mean?

Luke1066

Jonah01 wrote: »

Sorry I don't understand this bit.

The door for this is 600mm is that what you mean?

Your integrated W/M requires a 600mm opening. you will attach a 600mm (actually 597mm) door to the front of the washing machine. You can make the opening for the W/M by installing a decor panel on the left side of the W/M and use a filler piece between the decor panel and the wall to create the space for the W/M. Make sense?

Jonah01

Luke1066 wrote: »

Your integrated W/M requires a 600mm opening. you will attach a 600mm (actually 597mm) door to the front of the washing machine. You can make the opening for the W/M by installing a decor panel on the left side of the W/M and use a filler piece between the decor panel and the wall to create the space for the W/M. Make sense?

Yep got you.

What happens with the wall unit above. That just have the same. A decor panel and filler panel?

DIYKitchens are sending me the basket in a bit so will go through it and make sure it all there.

Might even post it on here if that isn't too cheeky

Luke1066

Jonah01 wrote: »

Yep got you.

DIYKitchens are sending me the basket in a bit so will go through it and make sure it all there.
What happens with the wall unit above. That just have the same. A decor panel and filler panel?

Might even post it on here if that isn't too cheeky

No Problem. Might be worth posting the 3D images also.
As for the wall, you can either do the same or just a wall decor panel with a gap between that and the wall which will need to be decorated. I Personally would match it with the base units

Jonah01

Luke1066 wrote: »

No Problem. Might be worth posting the 3D images also.
As for the wall, you can either do the same or just a wall decor panel with a gap between that and the wall which will need to be decorated. I Personally would match it with the base units

He is plan and 3d images

https://photos.app.goo.gl/zJu62vncnmQH8sNFA

Ignore the le mans in the corner . This will be a lemans with a shelved corner unit on top but doesn't show on the planner.

Thank you.

Jonah01

Jonah01 wrote: »

He is plan and 3d images

https://photos.app.goo.gl/zJu62vncnmQH8sNFA

Ignore the le mans in the corner . This will be a lemans with a shelved corner unit on top but doesn't show on the planner.



Thank you.

Link to order

https://drive.google.com/file/d/13lU0MmBy9lsen4NRZ_GLbs9H-Ies-seT/view?usp=sharing

Luke1066

Jonah01 wrote: »

He is plan and 3d images

https://photos.app.goo.gl/zJu62vncnmQH8sNFA

Ignore the le mans in the corner . This will be a lemans with a shelved corner unit on top but doesn't show on the planner.

Thank you.

Sorry I don't understand what you mean.

Jonah01

Luke1066 wrote: »

Sorry I don't understand what you mean.

Take a look at this.

https://photos.app.goo.gl/nDwdRcKGc491u1yZ9

The unit in the corner next to the oven is a swing out base unit with a corner shelf unit on top. Something DIY Kitchens do but doesn't appear for selection.

Jonah01

This is my DIYKitchens Order

I have added a filler panel for the base unit for the integrated washing machine and one for the wall unit above.

Hopefully all good.

https://drive.google.com/file/d/13lU0MmBy9lsen4NRZ_GLbs9H-Ies-seT/view?usp=sharing

Plan below.

https://photos.app.goo.gl/zJu62vncnmQH8sNFA