The Forum is currently experiencing technical issues which the team are working to resolve. Thank you for your patience.

Building control and load bearing walls

Hi,

A house we are considering buying has created a new doorway in an internal wall. The wall is probably (almost certainly) load bearing.

Assuming it is load bearing, would this require building control or is it only complete wall removal that requires building control sign off?
«1

Comments

  • Doozergirl
    Doozergirl Posts: 34,058 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    How wide is the doorway?
    Everything that is supposed to be in heaven is already here on earth.
  • keithdc
    keithdc Posts: 459 Forumite
    Part of the Furniture 100 Posts Name Dropper Combo Breaker
    Thank you for reading and replying.

    Sorry- I don't have precise measurements. It is approximately standard door width (perhaps slightly wider).

    If needed, I could find out but may take a while as would need to go via solicitors.

    Are there specific rules on this?
  • Doozergirl
    Doozergirl Posts: 34,058 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    If it's a normal-ish sized door then no, a concrete lintel is sufficient.
    Everything that is supposed to be in heaven is already here on earth.
  • sevenhills
    sevenhills Posts: 5,938 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    keithdc wrote: »
    Hi,

    A house we are considering buying has created a new doorway in an internal wall. The wall is probably (almost certainly) load bearing.

    Assuming it is load bearing, would this require building control or is it only complete wall removal that requires building control sign off?


    I recall a friend needing building regs for a new window.
  • Doozergirl
    Doozergirl Posts: 34,058 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    sevenhills wrote: »
    I recall a friend needing building regs for a new window.

    That's because windows need building regs.

    We're not talking about windows. We're talking about a door in an internal wall.
    Everything that is supposed to be in heaven is already here on earth.
  • phill99
    phill99 Posts: 9,093 Forumite
    Part of the Furniture 1,000 Posts
    Doozergirl wrote: »
    That's because windows need building regs.

    We're not talking about windows. We're talking about a door in an internal wall.

    But if an internal wall is load bearing it will still need building regs and an engineers calcs.
    Eat vegetables and fear no creditors, rather than eat duck and hide.
  • Yazmina
    Yazmina Posts: 303 Forumite
    Part of the Furniture 100 Posts Combo Breaker
    I'm planning to remove part of an internal wall in my house and the builder tells me I'll need to get building control approval first.
  • keithdc
    keithdc Posts: 459 Forumite
    Part of the Furniture 100 Posts Name Dropper Combo Breaker
    Thank you everyone for your contributions.

    My assumption was that there must be a point where building control would be required (e.g. drilling a hole would not require building control, removing a wall would require it), but I was unclear where the dividing line was. Is this officially recorded anywhere?
  • sevenhills
    sevenhills Posts: 5,938 Forumite
    Part of the Furniture 1,000 Posts Name Dropper
    What building regulations apply to internal walls?


    If you wish to build a new internal wall, remove an internal wall, or form an opening in an internal wall, building regulations will normally apply.


    https://www.planningportal.co.uk/info/200130/common_projects/33/internal_walls/2
  • Doozergirl
    Doozergirl Posts: 34,058 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Photogenic
    phill99 wrote: »
    But if an internal wall is load bearing it will still need building regs and an engineers calcs.

    A regular doorway in an internal wall doesn't need calculations. It may need building regulations (the guidance says they *normally* apply) but I really don't think it does.

    We must have knocked hundreds of doors into different rooms during renovations and had building inspectors out for every job, given the scale of what we do. They've certainly known about doorways being created but they've never even inspected one, let alone started a conversation about needing calculations for forming a regular doorway.

    Of course one needs to carry out the job properly, but I've never seen a BCO remotely interested.
    Everything that is supposed to be in heaven is already here on earth.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 350K Banking & Borrowing
  • 252.7K Reduce Debt & Boost Income
  • 453.1K Spending & Discounts
  • 242.9K Work, Benefits & Business
  • 619.8K Mortgages, Homes & Bills
  • 176.4K Life & Family
  • 255.9K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 15.1K Coronavirus Support Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.