Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Wierd TV remote problem
JohnB47
Posts: 2,787
Forumite
in Techie Stuff
Last night we were watching recorded program. Near the end, we noticed that the little LED on the TV was flickering (green). I put the TV and HDD recorder in standby and the TV led changed to flickering red. I went towards the TV, to remove and replace the power lead (which I did, to no effect). While doing that I noticed that, as i approached the TV, the flickering stopped and as I stepped back it began again.
I did this a number of times, at which point we thought I had begun to get supernatural powers.
So I sat down and for some reason decided to pick up the TV remote (I had been using the HDD recorder remote up til then). As I do so, the red flickering stopped. So I opened the battery compartment and spun the batteries). The problem has now dissapeared. My moving towards the TV simply blocked the path from the TV remote and the TV (the TV remote was sitting pointing at the TV).
How weird is all that?
I did this a number of times, at which point we thought I had begun to get supernatural powers.
So I sat down and for some reason decided to pick up the TV remote (I had been using the HDD recorder remote up til then). As I do so, the red flickering stopped. So I opened the battery compartment and spun the batteries). The problem has now dissapeared. My moving towards the TV simply blocked the path from the TV remote and the TV (the TV remote was sitting pointing at the TV).
How weird is all that?
0
Comments
-
Stuck button on the remote.0
-
What was the point of spinning the batteries?Changing the world, one sarcastic comment at a time.0
-
What was the point of spinning the batteries?
You often get a bit of oxidation forming on electrical contacts such as battery terminals and this oxidation can have quite a high resistance which stops the unit from functioning properly.
Whilst it's best to totally remove the batteries and clean the terminals, simply spinning them can clean a bit of the oxidation off for a while.0 -
shaun_from_Africa wrote: »You often get a bit of oxidation forming on electrical contacts such as battery terminals and this oxidation can have quite a high resistance which stops the unit from functioning properly.
Whilst it's best to totally remove the batteries and clean the terminals, simply spinning them can clean a bit of the oxidation off for a while.
Took the words out of my mouth!0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 355.9K Banking & Borrowing
- 255K Reduce Debt & Boost Income
- 456.2K Spending & Discounts
- 248.5K Work, Benefits & Business
- 606.2K Mortgages, Homes & Bills
- 179.1K Life & Family
- 264K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards
