Is it possible to have a cutlery drawer under an induction hob

beduth

We have a large cutlery draw 900 mm under the induction hob, no problems what so ever.

Mr.Generous

So I shouldn't install it above my magnet drawer then?

madeinireland_2

Hi - Apologies for hijacking the thread but I have a very closely aligned question.


I’m in the process of getting my new DIY-Kitchen installed and so far going well - but just hit a bit of a snag...

I am having an induction Hob fitted. It’s a Neff induction hob and I will have drawers underneath. The Hob installation instructions say that you need to leave a gap of min 65mm between the bottom of the glass of the Hob and the top of the drawer beneath. The Worktop covers 30mm of the Gap but I appear to only be able to create another 30mm max. Physically it will fit as the dimension is 51mm for the actual hardware meaning I would have a gap of about 9 mm from bottom of Hob to top of drawer but they effectively specify a total of 65mm and I can only create 60mm.

Is this a problem you faced and if so how did you tackle it? Just accept you can’t create the 65mm gap and 60 will have to do? Or some other clever ploy?


Thanks...