📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Vented Cylinder...No Hot Water

Options
Hi
I have not long bought a house with a discontinued Baxi Solo HE (Heat only) boiler.
The heating in the house seems to work fine.
The hot water on the other hand is a mystery.
The cylinder thermostat (a Drayton) is strapped to the tank but the tank itself also has a thermostat on the top both are wired up and are live.

The top built in thermostat does not have a reset but does have a basic temperature dial.

The boiler time controller has two switches one for heating and one for water both seem to operate the heating and when alternated I get the same live reading at the cylinder.

The hot water uses a pump which does work on demand.

A) Do I actually need both thermostats on the cylinder?
B) Can I change them for a more modern control system?
«1

Comments

  • HappyMJ
    HappyMJ Posts: 21,115 Forumite
    10,000 Posts Combo Breaker
    Top thermostat is probably an immersion element. A backup for when the boiler doesn't work. It should be turned off at the mains as it will use electricity to heat the top section of the cylinder if the boiler is not heating the water and the water has gone cold.

    How about some photo's.
    :footie:
    :p Regular savers earn 6% interest (HSBC, First Direct, M&S) :p Loans cost 2.9% per year (Nationwide) = FREE money. :p
  • Hi Thanks...I tried the photos but the site wont let me post them as i am new?
  • HappyMJ
    HappyMJ Posts: 21,115 Forumite
    10,000 Posts Combo Breaker
    Mark_se wrote: »
    Hi Thanks...I tried the photos but the site wont let me post them as i am new?

    Yeah it does that...try posting a portion of the link..remove the http and stick a space somewhere in it to confuse it so it doesn't look like a web address. Someone will repost the correct link for you.
    :footie:
    :p Regular savers earn 6% interest (HSBC, First Direct, M&S) :p Loans cost 2.9% per year (Nationwide) = FREE money. :p
  • immersion element
    h t t p s://gyazo.com/0119ac08f62be9af8d492bd99736d972
  • Tank Thermo
    h t t p s://gyazo.com/26c38857bf88fa638d7a2ca3627a9ca0
  • Pump
    h t t p s://gyazo.com/6e6de0cb582dcd80e5cebeaf4f27a5fe
  • wealdroam
    wealdroam Posts: 19,180 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Combo Breaker
    Mark_se wrote: »
    Pump
    h t t p s://gyazo.com/6e6de0cb582dcd80e5cebeaf4f27a5fe
    This a picture of your shower pump.

    Nothing to do with the heating - just boosts the pressure of water coming out of your shower.
  • Sorry I know was just illustrating that the hot water is pumped around the house on demand when the hot water is working.

    Sry.
  • wealdroam
    wealdroam Posts: 19,180 Forumite
    Part of the Furniture 10,000 Posts Name Dropper Combo Breaker
    edited 17 October 2015 at 5:55PM
    Mark_se wrote: »
    immersion element
    h t t p s://gyazo.com/0119ac08f62be9af8d492bd99736d972
    This thermostat controls your immersion heater. Follow the wires to the wall where you should find a switch.

    Switching it on will provide hot water without the boiler being on.

    Is there a plastic cover for this?

    WARNING - those two terminals to the right, with the screwdriver slot in the top, will be LIVE at mains voltage when this heater is switched on.
  • Hi yes i have and Its on, I have tested and the immersion is live at the point of connection but ....no hot water?
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351.2K Banking & Borrowing
  • 253.2K Reduce Debt & Boost Income
  • 453.7K Spending & Discounts
  • 244.2K Work, Benefits & Business
  • 599.3K Mortgages, Homes & Bills
  • 177K Life & Family
  • 257.6K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.2K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.