📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

No cold water tap for washing machine?

2

Comments

  • lstar337 wrote: »
    Yeah check as Ruski says. Just because it goes to the boiler doesn't mean its hot. Could just branch off the boilers cold feed.
    From what the OP has said, I'd say there's no mistaking that it's hot.
    The coloured tap bit has come off, i had to use pliers to open it. It appears to be coming directly out of the boiler (washing machine is directly beneath) and the hose feels very hot when the mahine was running

    X
    Unless you have some other idea about what might be warming the hose up?
  • paulsad
    paulsad Posts: 1,315 Forumite
    Part of the Furniture 1,000 Posts Combo Breaker
    Sounds very suspect to me that someone has connected a washer to the boiler pipework? Could be a very stupid thing to do. Seriously I'd get someone in; either a plumber or someone who knows what they are doing to fit even a self tapper (as mentioned above) into the cold water feed under the sink or nearby cold water pipe. I've worked for a lot of landlords and some of the electrical/plumbing shortcuts I've seen beggar belief.
  • Ill post a photo later, it seemed weird to me too, im used to my maxhine being near the sink!
  • jk0
    jk0 Posts: 3,479 Forumite
    Eighth Anniversary 1,000 Posts Name Dropper
    My mother has hot tap just for her dishwasher to save electricity. I bet the person who installed that tap had a dishwasher on it.
  • Wpuld you have a dishwasher and no washingachine though? I cant imagine life with hand washing lol
  • image_zps05aada40.jpg

    The boiler is directly above
  • Norman_Castle
    Norman_Castle Posts: 11,871 Forumite
    Part of the Furniture 10,000 Posts Photogenic Name Dropper
    That looks like a self cutting tap so is more likely to have been fitted by an amateur plumber. You need to work out which pipe is the cold water feed for the central heating. A picture of the pipework directly under the boiler may help.
  • ariba10
    ariba10 Posts: 5,432 Forumite
    Part of the Furniture 1,000 Posts Combo Breaker
    Our dishwashers is a cold fill, with only one filling hose.

    It is connected to the hot water system.

    We have had it for five years. No problems yet.
    I used to be indecisive but now I am not sure.
  • Ruski
    Ruski Posts: 1,628 Forumite
    Looks like they may have 'pinched' the 'old' wm tap for the filling loop for the central heating.


    Cold is the pipe to the right of the hot-hose connector and needs a new connector putting on that pipe .


    £40 quid for a jobbing plumber, crate a beer for a mate who knows what they're doing.


    HTH


    Russ
    Perfection takes time: don't expect miracles in a day :D
  • Ruski wrote: »
    .... crate a beer for a mate who knows what they're doing.

    Just make sure they do know what they are doing nad not just saying they do......... :D
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351.2K Banking & Borrowing
  • 253.2K Reduce Debt & Boost Income
  • 453.7K Spending & Discounts
  • 244.2K Work, Benefits & Business
  • 599.3K Mortgages, Homes & Bills
  • 177.1K Life & Family
  • 257.7K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.2K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.