We'd like to remind Forumites to please avoid political debate on the Forum. This is to keep it a safe and useful space for MoneySaving discussions. Threads that are - or become - political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

Does a vented hood work as well as a passive hood when not switched on

A few questions about cooker hoods which the salesperson in currys was unable to help.

1) with extracted hoods does the ducting let in cold air/draught during the cold winter months?

2) when the vent is not powered on will the filters work as effectively as passive cooker hoods.

3) how much wider should the cooker hood be in relation to the hob?
«1

Comments

  • Ruski
    Ruski Posts: 1,628 Forumite
    Very good Miele site here should answer all of your questions.

    HTH

    Russ
    Perfection takes time: don't expect miracles in a day :D
  • If it's a gas hob then the hood clearances from directly above the hob should be around 760mm
  • Ant555
    Ant555 Posts: 1,576 Forumite
    Part of the Furniture Photogenic 1,000 Posts Name Dropper
    edited 3 September 2014 at 5:35PM

    1) with extracted hoods does the ducting let in cold air/draught during the cold winter months?

    Not in my experience, the vent on the outside wall has flaps that keep it closed. If the wind is blowing then I can hear it open and close every now and then but the draught definitely doesn't seem to cause a problem in the kitchen.

    We have something similar to this on the outside wall
    http://www.xtremewholesale.co.uk/media/catalog/product/cache/1/image/280x280/86ca6416110b7a08184c045d3e2b4ed9/w/a/wall_vent_gravity_flap.jpg
    2) when the vent is not powered on will the filters work as effectively as passive cooker hoods.
    ?
    I am not sure if the filters would do any work at all on my particular hood if it was off. Steam does travel up towards the hood of course but I am not sure that much of it would end up being vented through the hood, into the pipe and then out of the wall (1.5m along the pipe) without it being switched on.
    If the hood is off then my outside vent (shown in the pic above) is closed, if I switch the hood on then the vent immediately opens up due to the airflow.

    Hope this helps
  • Ectophile
    Ectophile Posts: 7,550 Forumite
    Part of the Furniture First Post Name Dropper
    A few questions about cooker hoods which the salesperson in currys was unable to help.

    1) with extracted hoods does the ducting let in cold air/draught during the cold winter months?

    There should be a self-closing flap on the outside to keep the draughts out.
    2) when the vent is not powered on will the filters work as effectively as passive cooker hoods.

    It won't do anything at all.
    3) how much wider should the cooker hood be in relation to the hob?

    Why would it be any wider? Mine isn't.
    If it sticks, force it.
    If it breaks, well it wasn't working right anyway.
  • londonTiger
    londonTiger Posts: 4,903 Forumite
    oh, so a hood without an extractor still has a fan on?
  • londonTiger
    londonTiger Posts: 4,903 Forumite
    Ectophile wrote: »


    Why would it be any wider? Mine isn't.

    I'm guessing the steam doesn't go straight up and needs to be a bit more wider than the hob to catch more of the steamm
  • oh, so a hood without an extractor still has a fan on?

    You get 2 types of cooker hood - extracting and recirculating. They both have fans, but an extracting one vents to the outside, whereas a recirculating one just filters the air (sort of) and blows it back out into the room. If you have the means to vent to the outside get an extracting hood, they're much more effective.
  • BlueC
    BlueC Posts: 734 Forumite
    Combo Breaker First Post First Anniversary Name Dropper
    You get 2 types of cooker hood - extracting and recirculating. They both have fans, but an extracting one vents to the outside, whereas a recirculating one just filters the air (sort of) and blows it back out into the room. If you have the means to vent to the outside get an extracting hood, they're much more effective.

    Very good answer. One thing to add: if you are venting more than about 1.5m the steam will turn back to water and either collect in the vent, fall back into the hood and onto your hob, or dribble down the wall outside. Which of these depends on the vent angle.

    Basically vents only work over very short distances.
  • Our kitchen was designed so the cooker and hood was on an outside wall,so a very short direct vent of 150mm. Its so effective that you know whats for tea, as soon as you pull up in the car. Always go for vented if possible!
  • londonTiger
    londonTiger Posts: 4,903 Forumite
    Thanks for the advice. The cooker is probably 1 meter away from garden wall but total pipework would be 1m sideways and 0.6m vertical. Should be fine because I know someone who has a vented hood and their cooker is further away from outside wall than ours
This discussion has been closed.
Meet your Ambassadors

Categories

  • All Categories
  • 345.7K Banking & Borrowing
  • 251K Reduce Debt & Boost Income
  • 450.9K Spending & Discounts
  • 237.7K Work, Benefits & Business
  • 612.5K Mortgages, Homes & Bills
  • 174.3K Life & Family
  • 250.8K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16K Discuss & Feedback
  • 15.1K Coronavirus Support Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.