We’d like to remind Forumites to please avoid political debate on the Forum.

This is to keep it a safe and useful space for MoneySaving discussions. Threads that are – or become – political in nature may be removed in line with the Forum’s rules. Thank you for your understanding.

📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

sky remote.....tv now stuck on standby ??

Hi folks

ive just spent 2 day wiring various rooms upto my sky+ box..ive just been testing it out and programed a new sky+remote to control the tv functions. However after putting the tv in standby with the sky remote it will now not come back on ??. Ive tried the tv remote and also manualy tried to get it back on but its frozen on standby, it does recognise any remote ?? .... what the hell !!!
anybody had this problem, its a jvc ..what can i do .....
regards
«1

Comments

  • Conor_3
    Conor_3 Posts: 6,944 Forumite
    Ever thought about turning the plug off and back on again at the wall ?
  • steveowen100
    steveowen100 Posts: 63 Forumite
    Hey Conor

    ever thought about some constructive advice......
  • Conor_3
    Conor_3 Posts: 6,944 Forumite
    Well usually it works. If you can't turn it on from standby using the remote, turn it off at the wall and back on again which resets the TV.

    Sometimes you need to leave it off a while for the caps in the PSU to discharge though.
  • magic_pants
    magic_pants Posts: 204 Forumite
    What I would do is unplug EVERYTHING (aprt from power naturally!) from your TV and try the TV remote.
  • NOWSE
    NOWSE Posts: 386 Forumite
    Part of the Furniture Combo Breaker
    My parents' Sky+ box got stuck in standby last weekend. Nothing I tried worked and so I phoned Sky, who sent out an engineer. My parents have only had Sky+ plus for a month and it appears that the engineer who installed it put it underneath their DVD player. This resulted in the Sky+ box overheating. In the circumstances the box was replaced and re-positioned on top of the DVD player.
  • M3_Sussex
    M3_Sussex Posts: 351 Forumite
    Part of the Furniture Combo Breaker
    Hi folks

    ive just spent 2 day wiring various rooms upto my sky+ box..ive just been testing it out and programed a new sky+remote to control the tv functions. However after putting the tv in standby with the sky remote it will now not come back on ??. Ive tried the tv remote and also manualy tried to get it back on but its frozen on standby, it does recognise any remote ?? .... what the hell !!!
    anybody had this problem, its a jvc ..what can i do .....
    regards

    This is Sky's stock answer to this issue:

    Hold in the back up button.
    un plug and re plug the sky + system
    keep holding back up


    If this doesn't work it may well be a failed hard drive.

    You could also try a master reset but you'll lose any recordings and series links:


    1/ Unplug your box

    2/ Hold down the Left & Right Buttons on the front of your box

    3/ Plug the Box back in (Still holding the Left & Right Buttons)

    4/ Whilst still holding the L & R Buttons press and release the Standby button on the front of the box

    The Green circular light should light up now

    5/ Let go of the Left and Right buttons and Press Select

    The Green light should rotate And the Record and Play light should light up.

    After a short wile the box will Turn off, It will be of a short wile then it will re boot.

    Now the Power light will come on (red) press it and your box should come out of standby...?

  • sco0ter
    sco0ter Posts: 2,476 Forumite
    Hi folks

    ive just spent 2 day wiring various rooms upto my sky+ box..ive just been testing it out and programed a new sky+remote to control the tv functions. However after putting the tv in standby with the sky remote it will now not come back on ??. Ive tried the tv remote and also manualy tried to get it back on but its frozen on standby, it does recognise any remote ?? .... what the hell !!!
    anybody had this problem, its a jvc ..what can i do .....
    regards


    Try disconnecting everything from the rear of the tv like scarts and ariel leads. Then switch of TV at mains then back on and try from there
  • DonDon_3
    DonDon_3 Posts: 42 Forumite
    Are there any channel selection buttons on the TV itself?
    Generally, pressing one of those should bring it out of standby.
  • steveowen100
    steveowen100 Posts: 63 Forumite
    Hi foks

    At last !!!....... i removed everything from the tv inc 3 scart leads and aerial lead and hey presto the tv came out of standby, i was redy to take it to the repair shop, so thanks to all the replys to my post. I still cant undertsand why it was stuck in standby though, anybody got anexplanation please post....


    cheers!!!
  • Hey Conor

    ever thought about some constructive advice......

    Hi,

    reading through the replies, looks as though Conor's advice was constructive after all, making your reply uncalled for.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 352.2K Banking & Borrowing
  • 253.6K Reduce Debt & Boost Income
  • 454.3K Spending & Discounts
  • 245.3K Work, Benefits & Business
  • 601K Mortgages, Homes & Bills
  • 177.5K Life & Family
  • 259.1K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16K Discuss & Feedback
  • 37.7K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.