Sky LNB low high HELP!

uddin_1995 · 17 February 2014 at 2:36PM

Hi. I have an installer not from sky installing a multiswitch to the sky LNB. The multiswitch needs a high and low band input but the sky LNB is labelled P1 P2 P3 P4. Which of the quad ports is high and low. Thanks.

Kurtis_Blue · 17 February 2014 at 2:58PM

You have a Quad LNB you need a QUATTRO LNB.

And you need to find a proper installer, you seem to have a window cleaner doing it.

uddin_1995 · 17 February 2014 at 7:07PM

Kurtis_Blue wrote: »

You have a Quad LNB you need a QUATTRO LNB.

And you need to find a proper installer, you seem to have a window cleaner doing it.

thanks for your response. are there any quatro lnb that are suitable for a sky mini dish?

Browntoa · 17 February 2014 at 7:09PM

http://www.ebay.co.uk/sch/i.html?_nkw=quattro+lnb

uddin_1995 · 17 February 2014 at 7:14PM

Browntoa wrote: »

http://www.ebay.co.uk/sch/i.html?_nkw=quattro+lnb

thanks for the link. I always go on eBay first lol but wasnt able to find one thats for a sky mini dish

Browntoa · 17 February 2014 at 7:16PM

think they all fit the minidish, mine was a straight swap when I did it without any realignment

Kurtis_Blue · 17 February 2014 at 7:21PM

uddin_1995 wrote: »

thanks for your response. are there any quatro lnb that are suitable for a sky mini dish?

No, you should be fitting a 60CM ROUND dish, no quattro is made for the elliptical sky dish.

uddin_1995 · 17 February 2014 at 7:31PM

Kurtis_Blue wrote: »

No, you should be fitting a 60CM ROUND dish, no quattro is made for the elliptical sky dish.

thanks, yes thats why i was thinking aswell.

do you know if the sky mini dish bracket can be used for a bigger dish?

Kurtis_Blue · 17 February 2014 at 7:55PM

If you brought a "zone 2" dish from screwfix etc... then possibly depending on type brought and angle needed from the wall.
A Zone one wall bracket will be no good.

But this stuff is cheap for hardware get the right stuff and do it once.