have wifi but cann't access internet

leegate

it is KLG 575 (Gold) with DHCP disabled.

I just try to connect ADSL router LAN to Kcorp WAN port, and pc to Kcorp LAN port, with this setting I can can not access internet. not sure where setting I need to change.

Rooked_2

I have a question..... Why are you using more than one router? It makes no sense to me!

Usual set up is phoneline to router - then enet cable to PC

If its wireless then remove the enet cable - usually issues of being connected and no internet are down to encryption - try disabling encryption and see what happens

dickibobboy

It seems to me that dhcp is on both routers and it wont talk right

cledor

leegate wrote: »

it is KLG 575 (Gold) with DHCP disabled.

I just try to connect ADSL router LAN to Kcorp WAN port, and pc to Kcorp LAN port, with this setting I can can not access internet. not sure where setting I need to change.

I don't think LAN-LAN port is the correct way to connect it, all you are doing is passing data through the 4-port LAN switch. The Kcorp router must be fed through its WAN port and correctly configured in conjunction with the Zyxel. You need to carefullly read the manuals and set up the relevant IP address ranges and DHCPs. Sorry but I've not done this router-router setting before so can't give you precise info.

The Kcorp KLG575 manual (pdf) can be downloaded here

leegate

thanks everyone, I will try again tonight.

leegate

Just like to update you that my wireless netowork now working. I have set the the authentication mode between lap and router are different to be the same. it seems to sort things out.

Once again, thanks every one's help. I consider this case is now closed.