We'd like to remind Forumites to please avoid political debate on the Forum... Read More »
We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Question on the Condensing function of my LPG boiler
Options

safara
Posts: 76 Forumite


Hiya All,
I have a Baxi condenser boiler fitted into a property that we have been in for a few months. Have a big LPG tank in the garden and trying to get the place set up for heating without costing too much. Proving difficult, this damn stuff is expensive!!
Large detached property and the boiler is a Baxi Duo-tec 2 Combi 40 GA.
We are controlling the boiler with a Baxi 24 hour wireless digital programmer and room sensor.
I have read about the "condensing" function where if the returned CH temp is less than 55 degrees then the boiler will use the exhaust gasses to help re-heat the outgoing CH flow. Is this true?
And as I cant find a function for displaying the return temp, I have the outgoing set at 63 degrees (something I read googling about) How does this sound?
I know that every building and system is different and it is all about finding a balance.
How does one know when the boiler is functioning in condensing mode?
If I set the lower temp to something like 18 degrees there are long periods of time where the boiler sounds like it is on, but the Flame icon is not showing. Does this mean that it is just pumping water around without heating it as it does not need to?
And this should be a good thing?
Cheers
I have a Baxi condenser boiler fitted into a property that we have been in for a few months. Have a big LPG tank in the garden and trying to get the place set up for heating without costing too much. Proving difficult, this damn stuff is expensive!!
Large detached property and the boiler is a Baxi Duo-tec 2 Combi 40 GA.
We are controlling the boiler with a Baxi 24 hour wireless digital programmer and room sensor.
I have read about the "condensing" function where if the returned CH temp is less than 55 degrees then the boiler will use the exhaust gasses to help re-heat the outgoing CH flow. Is this true?
And as I cant find a function for displaying the return temp, I have the outgoing set at 63 degrees (something I read googling about) How does this sound?
I know that every building and system is different and it is all about finding a balance.
How does one know when the boiler is functioning in condensing mode?
If I set the lower temp to something like 18 degrees there are long periods of time where the boiler sounds like it is on, but the Flame icon is not showing. Does this mean that it is just pumping water around without heating it as it does not need to?
And this should be a good thing?
Cheers
0
Comments
-
If I set the lower temp to something like 18 degrees there are long periods of time where the boiler sounds like it is on, but the Flame icon is not showing. Does this mean that it is just pumping water around without heating it as it does not need to?0
-
Hmmm, OK. Will have a go at contacting Baxi then.
Do other condensing boilers not do this sort of thing?0 -
In a perfect world you should have a 20c temp differential between the flow and return temperatures.
Hardly any systems will ever achieve this though, more likely around 15c.
If you are warm enough with it set at 63c, then leave it there.0
This discussion has been closed.
Confirm your email address to Create Threads and Reply

Categories
- All Categories
- 350.9K Banking & Borrowing
- 253.1K Reduce Debt & Boost Income
- 453.5K Spending & Discounts
- 243.9K Work, Benefits & Business
- 598.7K Mortgages, Homes & Bills
- 176.9K Life & Family
- 257.2K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.1K Discuss & Feedback
- 37.6K Read-Only Boards