📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

manual assessment at Jag/Land Rover

Options
1…3536384041…517

Comments

  • punk84
    punk84 Posts: 245 Forumite
    edited 11 August 2012 at 6:10PM
    MSarch wrote: »
    Punk84.. Believe me mate you are worrying way too much, you have the basics of the assembly task, trust me that is enough to go in and pass it.. If your good hands on its no problem and as for the magnets you do need to be fairly athletic not to say..
    yeah yeah yeah yeah
  • punk84
    punk84 Posts: 245 Forumite
    edited 11 August 2012 at 6:10PM
    So when you attach the pedal to the servo, is attached using nuts and bolts? I was under the impression that there are four long threads sticking out of the servo that you line up with the four holes on the pedal box? Am i wrong?


    Hello, fruit Burst baby!
  • Bigden
    Bigden Posts: 158 Forumite
    edited 11 August 2012 at 5:57PM
    Sometimes the questions are complicated and the answers are simple.
  • punk84
    punk84 Posts: 245 Forumite
    edited 11 August 2012 at 6:11PM
    Hello, fruit Burst baby!
  • Bigden
    Bigden Posts: 158 Forumite
    edited 11 August 2012 at 5:57PM
    Sometimes the questions are complicated and the answers are simple.
  • punk84
    punk84 Posts: 245 Forumite
    so how does the servo stay on the wooden jig?

    Sorry for so many questions mate.
  • Bigden
    Bigden Posts: 158 Forumite
    edited 11 August 2012 at 5:57PM
    Sometimes the questions are complicated and the answers are simple.
  • zepps
    zepps Posts: 26 Forumite
    Ninth Anniversary 10 Posts Combo Breaker
    Avfc25 wrote: »
    Can anyone actually see the questions and answers on the YouTube link? Iv only got Internet on my phone and I can't see anything it's to blurry.

    If the video is blurry, you can change the quality settings in the youtube clip.click on the setting icon which is the 5 icon from the right and choose 720p and the text will be much clearer.
    http://www.youtube.com/watch?v=51l0ZarBsNA&feature=youtu.be
  • punk84
    punk84 Posts: 245 Forumite
    Bigden wrote: »
    servo slots through the jig attach brake pedal it nakes it all one piece

    ahhh i see. sp the servo slots through the jig ( Im assuming from the back ) then the threads go through the jig, and then you line up the pedal box to the threads that have been fed through the jig right?
  • zepps
    zepps Posts: 26 Forumite
    Ninth Anniversary 10 Posts Combo Breaker
    punk84 wrote: »
    so how does the servo stay on the wooden jig?

    Sorry for so many questions mate.

    might be best to google the images i.e land rover or jaguar servo or brake pedal and have a look at the images to get a clearer idea.

    Theres a jag servo on ebay which looks very similar to the servo which is used on the test.
    http://www.ebay.co.uk/itm/Jaguar-XF-Brake-Servo-Unit-2010-/260970155966
This discussion has been closed.
★ ★ ★ Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351.2K Banking & Borrowing
  • 253.2K Reduce Debt & Boost Income
  • 453.7K Spending & Discounts
  • 244.2K Work, Benefits & Business
  • 599.3K Mortgages, Homes & Bills
  • 177K Life & Family
  • 257.7K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.2K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.
Update Your Picture