We're aware that some users are experiencing technical issues which the team are working to resolve. See the Community Noticeboard for more info. Thank you for your patience.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!

Are multifuel stoves cost effective nowadays?

Options
1246

Comments

  • coke, obviously!
  • lol :o really need to read through before i post
  • Ken68
    Ken68 Posts: 6,825 Forumite
    Part of the Furniture 1,000 Posts Energy Saving Champion Home Insurance Hacker!
    Instead of a woodburner, I opted for a halogen heater, gives out a warm glow, not on often but great mood enhancer
    Am thinking of a tealight or two for the flicker effect and maybe a recording of a real fire blazing away, coals falling , someone using a poker etc. You get the idea. MSE'ish
  • twinmom04
    twinmom04 Posts: 212 Forumite
    edited 20 March 2012 at 1:59PM
    I get my wood for free it has seasoned and dried. (fallen trees) dads a farmer he collects the trees for free and we both have free wood. he has been doing this for years so we have plenty of rotating fire wood. I do use coal if I have a spare £6 for a bag. we do also use pallets, scrap wood etc
    cracker challenge silver: £610/£1010.00 :j
    One debt vs 100 days: 1000.00/0.00
  • twinmom04
    twinmom04 Posts: 212 Forumite
    I have to note when i say we use pallets I do mean untreated pallets. would never burn chipboard or old kitchen units. our stove has saved us from poverty this winter as it was at the height of winter costing up £300 to heat our home a month, (bottle gas). We do have access to free wood with a constant supply (yes it is seasoned and not cut down and used straight away). :)
    cracker challenge silver: £610/£1010.00 :j
    One debt vs 100 days: 1000.00/0.00
  • smcqis
    smcqis Posts: 862 Forumite
    Part of the Furniture 500 Posts Combo Breaker
    Whats wrong with burning chipboard?
  • alleycat`
    alleycat` Posts: 1,901 Forumite
    Part of the Furniture 1,000 Posts Name Dropper Combo Breaker
    edited 27 March 2012 at 5:10PM
    smcqis wrote: »
    Whats wrong with burning chipboard?

    It's full of glue for starters.
    The fumes from it wouldn't be good for the old pipes (i wouldn't think).
    --
    Edit: Below is Lifted from another post
    --
    Quoting from a Material Safety Data Sheet (MSDS) for bonded wood products (chipboard,MDF):

    Target Organs
    Respiratory tract, eye and skin

    Potential Health Effects: Eyes
    Formaldehyde and wood dust may cause temporary irritation to the eyes. Symptoms include itching, burning,
    redness and tearing.

    Potential Health Effects: Skin
    Formaldehyde and various species of wood dust may cause allergic contact dermatitis in sensitized individuals. If
    an allergy preexists or develops, it may be necessary to remove the sensitized worker from further exposure to
    formaldehyde bonded wood products or wood dust.

    Potential Health Effects: Inhalation
    Formaldehyde may cause temporary irritation to the nose and throat. Wood dust may cause nasal dryness,
    irritation, coughing, headache and sinusitis. Exposure may result in allergic responses in sensitive individuals.

    Medical Conditions Aggravated by Exposure
    Formaldehyde or wood dust may aggravate preexisting skin, eye and respiratory conditions or allergies.

    Hazardous Combustion Products
    Thermal-oxidative degradation, or burning, of wood can produce irritating and potentially toxic fumes and gases
    including carbon monoxide, aldehydes and organic acids.
  • smcqis
    smcqis Posts: 862 Forumite
    Part of the Furniture 500 Posts Combo Breaker
    I have a couple boards of chipboard in garage that i was going to cut into kindling and just use a couple just to use it up or should i just chuck it? I wouldnt burn it regularly or big chunks
  • Leif
    Leif Posts: 3,727 Forumite
    smcqis wrote: »
    I have a couple boards of chipboard in garage that i was going to cut into kindling and just use a couple just to use it up or should i just chuck it? I wouldnt burn it regularly or big chunks

    Don't burn it, as advised earlier. There are also issues over the health impact of gases released by MDF, and the dust when sanded. And from a stove point of view there might be combustion deposits in the flue which are undesirable. Just a guess, but why risk it. Basically MDF and chipboard are not wood, although wood particles are one of the ingredients. I suspect the same goes for plywood.
    Warning: This forum may contain nuts.
  • thebigossu
    thebigossu Posts: 11 Forumite
    Can anyone give me some advice / info?

    I have a victorian semi with a cold front room (single block and original sash window). I want to install a multifuel stove to help heat the room (4 metres by 3.5 metres) and maybe a bit of the rest of the house.

    I am looking at the clearview pioneer 400 and the Charnwood Cove 1 (I prefer the look of the Charnwood but accept that the Clearview is a better stove). Could I burn them both overnight (probably using anthracite?) so that:
    a) I don't have to keep lighting it in the morning
    b) It helps with some heating overnight

    All opinions and advice welcome.
This discussion has been closed.
Meet your Ambassadors

🚀 Getting Started

Hi new member!

Our Getting Started Guide will help you get the most out of the Forum

Categories

  • All Categories
  • 351K Banking & Borrowing
  • 253.1K Reduce Debt & Boost Income
  • 453.6K Spending & Discounts
  • 244K Work, Benefits & Business
  • 598.9K Mortgages, Homes & Bills
  • 176.9K Life & Family
  • 257.3K Travel & Transport
  • 1.5M Hobbies & Leisure
  • 16.1K Discuss & Feedback
  • 37.6K Read-Only Boards

Is this how you want to be seen?

We see you are using a default avatar. It takes only a few seconds to pick a picture.