sky+ remote problem

fadetogrey

Hi all.My darling granddaughter dropped our sky+ remote control onto our hardwood floor this morning and (not surprisingly) it refused to work after.No matter which button you pressed the light on the remote wasnt coming on.So being a little knowledgeable I took out the batteries and took the remote apart reasoning that if it was done it was done.Anyway could see nothing wrong except the 2 screws holding the handset together were loose.So put it together and it worked!! except the volume control button.Now if I press it to raise/lower the volume the light on the remote lights up ok but not on the sky+ box.Im wondering is it still knackered or was it because I had the batteries out for about 20 mins and does it need reprogrammed,if so how? thanks in advance.

spike7451

It needs to be reprogrammed,you can find instructions & codes for the TV's on Sky Active.

Interactive - Sky Customer Service - Programme your Sky remote.

spike7451

Oh,and write the code down for next time,it looses the memory after 10 minutes.

fadetogrey

spike7451 wrote: »

It needs to be reprogrammed,you can find instructions & codes for the TV's on Sky Active.

Interactive - Sky Customer Service - Programme your Sky remote.

Thanks spike on the list of tv codes my tv comes up (panasonic) but not the model number (and theres a lot of those).mine is TX-P42X10B.can I use any other panasonic code??

spike7451

I had the same problem with my Samsung TV,tyr the code for the nearest model number listed.
ie instead of the code for your TX-P42X10B,try one for TX-P31ect ect.

I_am_kato

You probably have knackered it as you state.There is one thing you can try,remove one battery,press the select button for 60 seconds then replace the battery.