Trying for a Baby Part Six

twi1ight

Gaaahhhh. Trying to buy a thermometer on ebay but it won't work using my phone. I'm at work so really don't want to use the pc to order. Suppose I'll have to wait another day (yes. A WHOLE day) because if I order tonight at home it won't be posted until tomorrow.

How is everyone? Surviving Monday?

cleomolly

oh keeping my fingers corssed for you MrsV

QQuaver

dustystar02 wrote: »

She is currently on CD5 and I'm not seeing her til weds so I said it would be too late then but she said surely if she just turns in on thurs morning and pretends it's CD1 then it'll be fine, she just needs her 'peak' and isn't too bothered about charting.

Why not ask her when she would like her testing window to be?
And tomorrow morning, you could push the m button until it comes to CD5. That way she would only be a day off:)

If you have an old stick, perhaps you could reset it for her too.
This is the instruction (copy and pasted:p):

1. Remove the plastic cap from one end of a clean-unused-test-stick and snap the cap onto the other end of stick. Insert the test stick into the test stick slot of the monitor. The beveled corner on the insertion end of the stick must face in toward the monitor. THE STICK MUST SNAP INTO PLACE TO PERFORM PROPERLY. THE MONITOR SHOULD NOT BE TUNRED ON UNTIL STEP 2.

2. Press and hold the "M" button. Continue pressing the "M" button while turning the monitor on. NOTE: Do not take finger off the "M" button until these directions say to to do so in Step 5.

3. The screen will show the "remove the test stick" symbol(a flashing test stick with an arrow pointing right). Conitnue pressing "M".

4. Keep pressing the "M" button and in about 20 seconds, you will see a screen full of symbols. The screen will also display these symbols when you initially turn the montior on for the FIRST time. This indicates the memory is now cleared of all prior data.

5. Remove test stick first and then QUICKLY release your finger from the "M" button. The memory should now be cleared.

6. Your screen should display a flashing "M" and one or two dashes. If it does not, it will probably show a "1" and an "M" in a non-flashing mode. If so, you will need to repeat all steps of this process. This procedure may take several times before you successfully reset the unit to its"new" state.

mrsvicx wrote: »

Afternoon all. Still nothing from me....no AF that is. :)Im not testing again yet.:o
However (TMI ALERT) I seem to have LOADS of cm today, this morning it was a pale browny colour and now its clear - honestly, loads and loads:o Any ideas??

Some had tons of cm when pg, and some has it everytime just before AF:p
Fingers crossed:)

Lemon_Tree wrote: »

hi everyone, i really don't want to say this too loudly just in case but i think AF has booogered off. Could be my first proper AF since forever! started temping again on friday and have remember every day so far so keeping my fingers crossed this month.

Good luck!:j

curly07

Hey ladies, ive posted on here a few times before and need your views please..Im really confussed right now and hoping someone will know better! I've done a couple of ovulation calculators and got different answers both times!! Can anyone help me? i came off the pill in april and have had long cycles since this. cycle is average of 43 days, at most 45. the first day of my last period was 30th september. late sat night / early hours of sunday morning me and OH dtd unprotected. yesterday and today ive had all sorts of weird things happenin in my tummy, but not cramps and also feeling sick but not actually being sick. is it to early to tell? One calculator said i was most fertile between 16th-21st october, the other says its later in the month! can anoyone help? Its far too early to test as technically im not due af til 12th november. would drive you nuts this waiting around!! hoping for a bfp so i really hope the first calculator is right about timing!! anyone else experienced this??

QQuaver

curly07 wrote: »

cycle is average of 43 days, at most 45. the first day of my last period was 30th september. late sat night / early hours of sunday morning me and OH dtd unprotected. yesterday and today ive had all sorts of weird things happenin in my tummy, but not cramps and also feeling sick but not actually being sick.

Hi Curly long time no see:wave:

If the only unprotected BD was Sat/Sun, then it is too early to tell. It takes 7-10 days for the egg to implant. No symptoms until implantation.

The weird happening to your tummy could be ov.
Is it near ovary? And down below?

curly07

QQuaver wrote: »

Hi Curly long time no see:wave:

If the only unprotected BD was Sat/Sun, then it is too early to tell. It takes 7-10 days for the egg to implant. No symptoms until implantation.

The weird happening to your tummy could be ov.
Is it near ovary? And down below?

Hi QQuaver :wave: yes indeed!!

Thanks for your very quick reply! yeah its low down i wouldnt say its cramps though just an odd feeling like tingly. im a bit confussed really, if its ov does that mean that its all happening down there right now? sorry to be so dumb, i do get confussed with it all :rotfl:

SusanC_2

curly07 wrote: »

Hi QQuaver :wave: yes indeed!!

Thanks for your very quick reply! yeah its low down i wouldnt say its cramps though just an odd feeling like tingly. im a bit confussed really, if its ov does that mean that its all happening down there right now? sorry to be so dumb, i do get confussed with it all :rotfl:

If you're due 2nd Nov, it would be about the right time...

ETA: Just realised you said 12th - ignore me.

QQuaver

curly07 wrote: »

Hi QQuaver :wave: yes indeed!!

Thanks for your very quick reply! yeah its low down i wouldnt say its cramps though just an odd feeling like tingly. im a bit confussed really, if its ov does that mean that its all happening down there right now? sorry to be so dumb, i do get confussed with it all :rotfl:

It could be, better BD tonight as well:j

phunkles

Afternoon lovelies
CD3 here and has done some crazy maths and should be seeing oh in 14 days

Currently reading the information sheet that came with my opk's this weekend Do not use fmu apparently???Seeing as my cycle length has been a bit random pretty much since leaving to fate I think im going to have to work out an average for when to start testing??
My leaflet has a lovely table in it lol

Its the small things

QQuaver

phunkles wrote: »

think im going to have to work out an average for when to start testing??
My leaflet has a lovely table in it lol

Its the small things

I usually use IC opks from around CD7, once a day to begin with, then from CD10, twice a day. When the lines get darker, I test multiple times:D