Ready, steady… save!
You don’t need a chart to join in. Here are 2 ways to record your savings:
1. Cross it off
Pop a chart into your first post. Saved an amount? Cross it out! Read more »
£0.01 £0.02 £0.03
2. Write it down
Skip the chart and add updates to your first post. Read more »
“Another +£3 saved today. Go me!”
Use +£ before each new saving so it counts towards your total.
📨 Have you signed up to the Forum's new Email Digest yet? Get a selection of trending threads sent straight to your inbox daily, weekly or monthly!
Car Radio Unlocking
Comments
-
be3f .......
code for serial M017966 is 76020 -
That is the code i have... however, it didn't seem to work, stuck me on the "wait 30" screen after I tried 3 times...
My steps so far:
1- turn radio on
2- enter the mentioned code as per the instructions
3- press "5" to finish0 -
be3f ........
Be sure youhave the correct Serial No. Where did you find the serial you have posted ????????:0 -
The correct radio SERIAL NUMBER usually begins with M or V followed by SIX digits ...such as M654321 or V654321
Sometimes pressing buttons 6 & 1 together or 6 & 2 will display this number
Otherwise remove the radio from the dashboard and post the SERIAL NUMBER found on a label on the casing
When I pressed on the buttons 6 and 1, it showed the number 0508010 -
Its on the sticker inside the Audio Guide that came with the manual
Sticker Shows the following:
UNIT TYPE SERIAL NUMBER
FD 3000 W M017966
KEY CODE 7602
*edited to correct s/n0 -
hello New battery, wrong code in book (and on radio?), can you help
Model is 6006E
s/n MO517970 -
m 017966 = 7602Its on the sticker inside the Audio Guide that came with the manual
Sticker Shows the following:
UNIT TYPE SERIAL NUMBER
FD 3000 W M017966
KEY CODE 7602
*edited to correct s/nTO ENTER CODE - press station preset button 1 repeatedly for 1st diget of your keycode - repeat the same on - 2 for 2nd - 3 for 3rd - 4 for 4th - & if the display then shows the correct keycode number press preset button 5 to enter - photo shows radio extractor keys & serial number on the radio casing - go to u-tube & see remove ford radio0 -
TO ENTER CODE - press station preset button 1 repeatedly for 1st diget of your keycode - repeat the same on - 2 for 2nd - 3 for 3rd - 4 for 4th - & if the display then shows the correct keycode number press preset button 5 to enter - photo shows radio extractor keys & serial number on the radio casing - go to u-tube & see remove ford radio0
-
m051797 = 1658hello new battery, wrong code in book (and on radio?), can you help
model is 6006e
s/n mo51797TO ENTER CODE - press station preset button 1 repeatedly for 1st diget of your keycode - repeat the same on - 2 for 2nd - 3 for 3rd - 4 for 4th - & if the display then shows the correct keycode number press preset button 5 to enter - photo shows radio extractor keys & serial number on the radio casing - go to u-tube & see remove ford radio0 -
be3f ........
DO NOT KEEP TRYING AN UNLOCK THAT DOES NOT WORK
CONFIRM YOUR SERIAL No. TRY PRESSING 6AND1 OR 6AND2 WHICH ONLY WORKS ON SOME MODELS, If by doing this you do not find a serial No. Remove the radio and find the serial in same..0
This discussion has been closed.
Confirm your email address to Create Threads and Reply
Categories
- All Categories
- 355.9K Banking & Borrowing
- 254.9K Reduce Debt & Boost Income
- 456.2K Spending & Discounts
- 248.4K Work, Benefits & Business
- 606.1K Mortgages, Homes & Bills
- 179K Life & Family
- 263.9K Travel & Transport
- 1.5M Hobbies & Leisure
- 16.2K Discuss & Feedback
- 37.7K Read-Only Boards