Car Radio Unlocking

wallbash

flo85680 use 1471

jonboy35

mrs_angry wrote: »

i can help with this one as its the position my mum was in this morning,before you can re enter the code it has to reset and this can take a while you have to leave radio on and the ignition on position 1 for about 20 minites, then an option to enter your code appears after this time, enter code as per instructions and it should work.

its a pain but for every failed attempt you have to wait longer to reset, hope this helps

ps: it looks like the code you have is the wrong one, so make sure you have the correct code as you only get 10 attempts at this

thanks for your repley , just attemting to take radio out , to check seriel number for code to see if we have right code. any ideas how to take a radio out.

mrs_angry

jonboy35 wrote: »

thanks for your repley , just attemting to take radio out , to check seriel number for code to see if we have right code. any ideas how to take a radio out.

i have heard you can use allan keys, and did read of a coathanger method, best look it up on google before you attempt it, sorry cant help more as i have not taken mums out at all as asked regworts and he cant obtain the vdo cdr 500 codes

flo85680

Thank you very much !!

RegWorts

jonboy35 wrote: »

thanks for your repley , just attemting to take radio out , to check seriel number for code to see if we have right code. any ideas how to take a radio out.

Leave the RADIO switched ON.

This may involve leaving the ignition key in position 1 on the Ignition Switch

Here is a video showing how to remove a standard radio from the dashboard.
A pair of extractors are required (available from Ebay etc ) but these can be made from 2 pieces of bent, wire coat-hanger or 4 small drills(using the blunt end) or 4 small Allen Keys or 4 small screwdrivers or 4 nails or even 4 darts.

An assistant is useful to pull the radio out whilst you are releasing the 4 securing clips

http://www.youtube.com/watch?v=urC-4NbXvDQ

note: on some radios (including yours ) , these 4 holes may be protected by 4 small screws. These can be unscrewed using the appropriate size of Allen key.
====================================================

jonboy35

RegWorts wrote: »

Leave the RADIO switched ON.

This may involve leaving the ignition key in position 1 on the Ignition Switch

Here is a video showing how to remove a standard radio from the dashboard.
A pair of extractors are required (available from Ebay etc ) but these can be made from 2 pieces of bent, wire coat-hanger or 4 small drills(using the blunt end) or 4 small Allen Keys or 4 small screwdrivers or 4 nails or even 4 darts.

An assistant is useful to pull the radio out whilst you are releasing the 4 securing clips

http://www.youtube.com/watch?v=urC-4NbXvDQ

note: on some radios (including yours ) , these 4 holes may be protected by 4 small screws. These can be unscrewed using the appropriate size of Allen key.
====================================================[/QUOTe

i can not take the radio out, tyred and tryed but it anit budgeing.

left ignition on , got a bleep but cant enter code , its on safe with number 6 , ie 6 attempts lefted..

the front part of the radio comes away , and there are a load of numbers and letters on it ,

4660103 delco
gm 90493281
PA6-GF15

my car is 2002 , i know its old, 1.6 vauxhall astra.

mikis

The battery died on my renault grand scenic and now the radio is locked I'd be so grateful if somebody could supply me with the unlock code -thats all the numbers i cud find;model no RERNRDW132-10 security RNRD0440135068 prod no FD0704480135068.. 8200300859TL917 Thanks for help

jonboy35

jonboy35 wrote: »

RegWorts wrote: »

Leave the RADIO switched ON.

This may involve leaving the ignition key in position 1 on the Ignition Switch

Here is a video showing how to remove a standard radio from the dashboard.
A pair of extractors are required (available from Ebay etc ) but these can be made from 2 pieces of bent, wire coat-hanger or 4 small drills(using the blunt end) or 4 small Allen Keys or 4 small screwdrivers or 4 nails or even 4 darts.

An assistant is useful to pull the radio out whilst you are releasing the 4 securing clips

http://www.youtube.com/watch?v=urC-4NbXvDQ

note: on some radios (including yours ) , these 4 holes may be protected by 4 small screws. These can be unscrewed using the appropriate size of Allen key.
====================================================[/QUOTe

i can not take the radio out, tyred and tryed but it anit budgeing.

left ignition on , got a bleep but cant enter code , its on safe with number 6 , ie 6 attempts lefted..

the front part of the radio comes away , and there are a load of numbers and letters on it ,

4660103 delco
gm 90493281
PA6-GF15

my car is 2002 , i know its old, 1.6 vauxhall astra.

its all done , i have just smashed it in with a hammer.

no one could help , so i will now spend money i havnt got on a new stereo. childish yes , but hey it will finally work wont it once i buy anther one. if only i could got it out then i could of wrote down the seril number.

hughesy1987

what do you need to get a radio code , regards ian

wallbash

hughesy1987 wrote: »

what do you need to get a radio code , regards ian

You need the s/n

You post the M ( V) ****** and we reply with a ****

Check out the previous ........................ 20, 000 postings might give you an idea!

Take out the radio from dashboard s/n normally on a yellow sticker

A little work on your side , might help.